ROTOR GP-GENERATOR 4847571 - Caterpillar

OK/Select Button
The OK/Select button (3) is used for the following functions:
Selecting the highlighted entry in a list
Opening the configuration screen for a highlighted performance page quadrant
Selecting a highlighted item
Confirming an action when a popup is visible
Snooze a warning or information popupBack/Previous Button
The back/previous button (3) is used for the following functions:
Navigating to the previous screen
Cancel an action when a popup is visibleOperator Select Button
The operator select button (4) is used for the following functions:
Navigate to main menu screen from anywhere in the menu structure
If the main menu is visible, the menu button will return to performance pagesInformation Button
The information button (5) is used to obtain menu information.Prestart Monitoring Function
Turn the engine start switch to the ON position.The coolant temperature, the hydraulic oil temperature, the fuel level, and the position of the engine speed dial are now indicated.The monitoring system checks the level of the engine coolant, the engine oil, and the hydraulic oil before the engine starts.If the fluid level check detects a low fluid level, the appropriate message will be displayed. A pictograph will be shown to indicate the fluid level that is low.Note: The machine cannot perform an accurate fluid level check when the machine is on a slope. Perform the fluid level check on level ground.If the engine is started during the fluid level check, the monitor will cancel these checks.Machine Warnings
The Cat Monitoring System provides three warning categories. The first category requires only operator awareness. The second and 2S warning categories require an operator response. The third warning category requires immediate shutdown of the machine.
Table 1
OPERATION
Warning Category Warning Indications (1) Action Possible Result(2)
Flashing Alert Indicator Flashing Action Lamp Action Alarm
1 No immediate action is required. The system needs attention soon. No damage will occur to the machine. Minor reductions in machine performance may occur.
2 X X Change machine operation or perform maintenance to the system. Severe damage to components can occur.
2S X X X (3) Change machine operation or perform maintenance to the system. Severe damage to components can occur.
3 X X X (4) Immediately perform a safe engine shutdown. Injury to the operator or severe damage to components can occur.
(1) The active warning indications are marked with an X.
(2) This is the possible result if the operator takes no action.
(3) A steady alarm sounds.
(4) A pulsating action alarm sounds.The monitoring system has the following three warning levels for events:Warning Level 1 - Warning level 1 does not alert the operator that a warning has occurred and does not affect the operation of the machine. Warning level 1 is recorded. This warning may be viewed from the "Diagnostics" menu of the display. Warning level 1 may also be viewed with Cat® Electronic Technician (Cat ET) Service Tool.Warning Level 2 - Warning level 2 requires