RUBBER DOOR HOLDER 0985885 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-2352 Jack Stand Gp 1
B 9S-5561 Pin Driver Cap 1
C 9S-5563 Pin Driver Cap 1
Illustration 1 g03382842
Position quick coupler (1) onto Tooling (A), as shown.
Release the hydraulic system pressure.
Illustration 2 g03382382
Disconnect hose assemblies (2).
Illustration 3 g03382405
Remove pins (3) and remove cylinder (4).
Illustration 4 g03384141
Attach a suitable lifting device to tilt link (5). The weight of tilt link (5) is approximately 64 kg (140 lb).
Illustration 5 g03384143
Remove pin assembly (6) and lower tilt link (5) to the ground.
Illustration 6 g03384154
Disconnect brackets (7) from both sides of quick coupler (1).
Illustration 7 g03384147
Turn valve assemblies (8) and (9) to the OFF position.
Disconnect hose assemblies (10) and (11).
Illustration 8 g03384157
Typical example
Attach a suitable lifting device to quick coupler (1). The weight of quick coupler (1) is approximately 590 kg (1,300 lb). Remove bolts (12) and pin assemblies (13) from both sides.
Remove quick coupler (1). Installation Procedure
Install quick coupler (1) in the reverse order of removal.
Use Tooling (B) to install pin assembly (6).
Use Tooling (C) to install pins (13)