SCALE-CHARGING 1681958 - Caterpillar

Illustration 1 g03840651
Rear view
Table 1
Specification for 330-3868 Window Wiper Gp
Item Qty Part Specification Description
1 1 112-5869 Window Wiper Arm As The arm tension is 5.0 0.5 N (1.1 0.1 lb).
AngleC for the front window arm group from the automatic park position is 80 degrees.
2 1 8T-5400 Connector As Torque to 0.35 0.05 N m (3.10 0.44 lb in)
3 - - Torque to 2.4 0.3 N m (21.2 2.7 lb in).
4 - - Torque to 0.8 0.2 N m (7.1 1.8 lb in).
5 1 5C-7261 Nut Torque to 7.5 0.5 N m (66.4 4.4 lb in)
6 1 Nut Torque to 9 1 N m (80 9 lb in).
7 1 Nut Use following procedure to install wiper arm:
1. Torque to 21 1 N m (186 9 lb in).
2. Wait for minimum 0.5 hour to 4 hours maximum.
3. Again tighten to 21 1 N m (186 9 lb in).
4. Ensure that the minimum field torque for the nut is 12 N m (106 lb in).
D - - The distance of the wiper blade from the edge of the window in the park position is 71 3 mm (2.8 0.1 inch).
Illustration 2 g03728225
457-3648 Window Wiper Motor Gp
Table 2
Item Qty Part Specification Description
E - - Wiping angle from automatic parking position is 80 3 degrees.