2S7920 SCAVENGE PUMP GROUP Caterpillar parts
D8H, D9G
Rating:
Alternative (cross code) number:
CA2S7920
2S-7920
2S7920
CA2S7920
2S-7920
2S7920
Weight: 15 pounds 7 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Stevens Lake Parts One New Pump Group Fits CAT, Fits Caterpillar D8H, D9G Models Interchangeable with 2S-7920, 2S7920, 2S7920-A, CA2S7920
Stevens Lake Parts One New Aftermarket Replacement Oil Pump Group || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
Stevens Lake Parts One New Aftermarket Replacement Oil Pump Group || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
RAParts 2S7920 New Oil Pump Group Fits Various Fits Caterpillar Fits CAT Industrial Models
Reliable Aftermarket Parts One New Aftermarket Replacement Oil Pump Group Fits Various Fits Caterpillar Industrial Construction || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Reliable Aftermarket Parts One New Aftermarket Replacement Oil Pump Group Fits Various Fits Caterpillar Industrial Construction || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Stevens Lake Parts One New Pump Group Fits CAT, Fits Caterpillar D8H, D9G Models Interchangeable with 2S-7920, 2S7920, 2S7920-A, CA2S7920
Stevens Lake Parts One New Aftermarket Replacement Oil Pump Group || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
Stevens Lake Parts One New Aftermarket Replacement Oil Pump Group || This Is An Aftermarket Replacement Part Made To Meet Or Exceed OEM Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
Number on catalog scheme:
For full view, you need register
Information:
Remove Fuel Injection Valves (Direct Injection)
Start By:a. remove valve covers FLUID SPILLAGE CONTAINMENT Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "TOOLS AND SHOP PRODUCT GUIDE, NENG2500", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. Remove fuel line (1) with Tool (A).
Put protective caps on all fuel line openings.
2. Remove nut (3) that holds the fuel valve in adapter (2).3. Remove the fuel injection valve with Tool (B).Install Fuel Injection Valves (Direct Injection)
FLUID SPILLAGE CONTAINMENT Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "TOOLS AND SHOP PRODUCT GUIDE, NENG2500", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. If the seal on the direct injection valve has been removed, install a new seal as follows: a. Put a new seal on Tool (C).b. Put Tool (C) over valve body (1).c. Push the seal into position on the valve body 2. Install nozzle (2) on valve body (1) finger tight. 3. Install the fuel injection valve in direct injection adapter (3). Make sure the grooves (serrations) on valve body (1) are in alignment with the grooves (serrations) in adapter (3).4. Install the nut that hold the fuel injection valve in adapter (3). Tighten the nut to 75 7 N m (55 5 lb ft).5. Install fuel line (4). Tighten the nuts on the fuel line to a torque of 40 7 N m (30 5 lb ft) with Tool (A).End By:a. install valve covers
Start By:a. remove valve covers FLUID SPILLAGE CONTAINMENT Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "TOOLS AND SHOP PRODUCT GUIDE, NENG2500", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. Remove fuel line (1) with Tool (A).
Put protective caps on all fuel line openings.
2. Remove nut (3) that holds the fuel valve in adapter (2).3. Remove the fuel injection valve with Tool (B).Install Fuel Injection Valves (Direct Injection)
FLUID SPILLAGE CONTAINMENT Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "TOOLS AND SHOP PRODUCT GUIDE, NENG2500", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. If the seal on the direct injection valve has been removed, install a new seal as follows: a. Put a new seal on Tool (C).b. Put Tool (C) over valve body (1).c. Push the seal into position on the valve body 2. Install nozzle (2) on valve body (1) finger tight. 3. Install the fuel injection valve in direct injection adapter (3). Make sure the grooves (serrations) on valve body (1) are in alignment with the grooves (serrations) in adapter (3).4. Install the nut that hold the fuel injection valve in adapter (3). Tighten the nut to 75 7 N m (55 5 lb ft).5. Install fuel line (4). Tighten the nuts on the fuel line to a torque of 40 7 N m (30 5 lb ft) with Tool (A).End By:a. install valve covers
Caterpillar SIS machinery equipment:
Parts scavenge Caterpillar catalog:
594, D8H, D9G
D8H, D9G
D8H, D9G
594, D8H, D9G
631C, 633C, 637
9M6162
SCAVENGE PUMP GROUP
651, 657
651, 657
8M2597
SCAVENGE PUMP GROUP
651, 657
651, 657
641, 651, 657, 666
631C, 633C, 637
3K2488
SCAVENGE PUMP GROUP
955H, 977H
955H, 977H