SCRAPER G-AIR 1U5559 - Caterpillar

TARGET="_parent">Engine Oil Level - Check
Fairlead Sheave - Lubricate
Fairlead Sheave - Lubricate
Fuel System Water Separator - Drain
Hook and Wire Cable - Inspect
Horn - Test
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Seat Belt - Inspect
Sheave Block Bearings - Lubricate
Transmission System Oil Level - Check
Every 50 Service Hours or Weekly
Cab Filter (Fresh Air) - Clean/Inspect/Replace
Track Pins - Inspect
Initial 250 Service Hours
Winch Oil - Change
Every 250 Service Hours
Engine Oil Sample - Obtain
Every 250 Service Hours or Monthly
Belt - Inspect/Replace
Final Drive Oil Level - Check
Fuel Tank Water and Sediment - Drain
Track - Check/Adjust
Winch Oil Level - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Engine Valve Lash - Check
Engine Valve Rotators - Inspect
Every 500 Service Hours
Final Drive Oil Sample - Obtain
Fuel System Secondary Filter - Replace
Hydraulic System Oil Sample - Obtain
Transmission System Oil Sample - Obtain
Winch Frame Mounting - Inspect
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - Obtain
Engine Crankcase Breather - Clean
Engine Oil and Filter - Change
Fuel System Water Separator Element - Replace
Fuel Tank Cap and Strainer - Clean
Recoil Spring Compartment Oil Level - Check
Steering Charge Filter - Replace
Transmission System Oil Filter - Replace
Every 500 Service Hours or 1 Year
Winch Oil - Change
Every 1000 Service Hours
Battery - Inspect
Every 1000 Service Hours or 6 Months
Rollover Protective Structure (ROPS) - Inspect
Torque Converter Scavenge Screen - Clean
Transmission Magnetic Screen - Clean
Transmission Scavenge Screen - Clean
Transmission System Oil - Change
Every 2000 Service Hours or 1 Year
Air Conditioner Condenser - Clean
Final Drive Oil - Change
Hydraulic System Oil - Change
Hydraulic System Oil Filters - Replace
Track Roller Frame - Inspect
Track Roller Frame Guides - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Refrigerant Dryer - Replace
Every 3000 Service Hours or 18 Months
Hydraulic System Oil - Change
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 4000 Service Hours
Engine Valve Lash - Check
Engine Valve Rotators - Inspect
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Cooling System Water Temperature Regulator - Clean/Replace
Every 8000 Service Hours or 3 Years
Winch Assembly - Inspect
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change