SCRAPER AS 2404884 - Caterpillar

Illustration 1 g00453317
Rotation of the pump is clockwise when the pump is viewed from the drive end.Type of pump: GearBench test requirements: SAE 10W oil must be stabilized at 65°C (150°F) before the test is performed.Drive EndTest at Full Speed: Output ... 384.3 L/min (101.4 US gpm) Test pressure ... 690 kPa (100 psi) Test speed of engine ... 1840 rpm Test speed of pump ... 1750 rpm Output ... 377.1 L/min (99.5 US gpm) Test pressure ... 6900 kPa (1000 psi) Test speed of engine ... 1840 rpm Test speed of pump ... 1750 rpmTest at Half Speed: Output ... 191.8 L/min (50.6 US gpm) Test pressure ... 690 kPa (100 psi) Test speed of engine ... 920 rpm Test speed of pump ... 875 rpm Output ... 182.7 L/min (48.2 US gpm) Test pressure ... 6900 kPa (1000 psi) Test speed of engine ... 920 rpm Test speed of pump ... 875 rpmCover EndTest at Full Speed: Output ... 384.3 L/min (101.4 US gpm) Test pressure ... 690 kPa (100 psi) Test speed of engine ... 1840 rpm Test speed of pump ... 1750 rpm Output ... 377.1 L/min (99.5 US gpm) Test pressure ... 6900 kPa (1000 psi) Test speed of engine ... 1840 rpm Test speed of pump ... 1750 rpmTest at Half Speed: Output ... 191.8 L/min (50.6 US gpm) Test pressure ... 690 kPa (100 psi) Test speed of engine ... 920 rpm Test speed of pump ... 875 rpm Output ... 182.7 L/min (48.2 US gpm) Test pressure ... 6900 kPa (1000 psi) Test speed of engine ... 920 rpm Test speed of pump ... 875 rpmNote: Assemble the shaft seals so that the spring-loaded surfaces are opposite each other. (1) Torque for the four studs on the pump drive housing ... 65 10 N m (48 7 lb ft) (2) Torque for eight nuts ... 238 13 N m (175 10 lb ft)