SCRAPER GP-DRUM 4550113 - Caterpillar

Remove harness connector cover (H) from MC-C47( 174-MC566-RD(Red)). This is one of two 12-pin connectors currently unused on the cab harness near the newly installed Product Link radio (either PLE641 or PLE631) (9).
Illustration 12 g06123156
(J) 347-6371 Connector Receptacle As
(K) 347-6376 Connector Receptacle As
Disconnect receptacle (J) and receptacle (K).
Illustration 13 g06128312
(L) Antenna As
(M) Antenna Bracket
Remove existing antenna (L) on the ROPS first disconnecting the two coax cables running along the top of the cab. Loosen the nut below the antenna assembly and remove.
Remove old antenna bracket (M)
Illustration 14 g06123167
( 13) 443-8462 Antenna As
(14) 217-4590 Bracket As
(15) 487-4619 Bracket
(16) 8T-4121 Hard Washer
(17) 8T-4136 Bolt
(18) 132-5789 Clip
Install bracket (15) using bracket assembly (14), three hard washers (16), three bolts (17) two clip (18).
Illustration 15 g06123169
(J) 347-6371 Connector Receptacle As
(K) 347-6376 Connector Receptacle As
(19) 453-0928 Cable As
(N) GPS Connection (Blue)
(P) Cellular Connection (Brown)
Reroute and reattach coax cables. The coax cables are keyed.Connect receptacle assembly (J) of to GPS Connection (Blue) (N) of cable assembly (18).Connect receptacle assembly (K) of to Cellular Connection (Brown) (P) of cable assembly (18).
Illustration 16 g06123645
(20) 7K-1181 Cable Strap
Secure the cable assembly and harness assembly using 15 strap cables (20).Software Update
Update the information display software first with flash file 520-4883. Applies to both the 844K and 990K.Note: Information Display will be first to update.
Verify the "Product ID" still reads the correct prime product machine serial number within CatEt. If not, enter the correct serial number in the "Product ID" field.
Update implement software to 526-1539 Implement Software Gp (990K) or 518-3950 Implement Software Gp (844K)
Update transmission software to 507-6435 Power Train Software Gp (990K) or 518-1718 Power Train Software Gp (844K)
Update network manager software to 518-6161 Monitor Software Gp ( 990K and 844K)
Update cell radio software to 512-8575 Monitor Software Gp 990K and 844K
Upload configuration file to network manager. Use configuration file 507-6436 Monitor Software Gp for the 990K and 518-3958 Monitor Software Gpfor the 844K. Refer to Systems Operation, UENR5823, "Product Link ® Elite PLE641 and PLE631 Systems".
Update messenger Groups on the 990K and 844K as shown in Table 3.
Table 3
Messenger Group 1 514-6693 English/Spanish/Portuguese (Brazil)
Messenger Group 2 514-6694 English/Russian/Czech
Messenger Group 3 514-6695 English/Danish/Dutch/Swedish
Messenger Group 4 514-6696 English/Italian/French/German
Messenger Group 5 514-6697 English/Norwegian/Finnish/Icelandic
Messenger Group 6 514-6698 English/Japanese
Messenger Group 7 514-6699 English/Arabic/Turkish
Messenger Group 8 514-6700 English/Chinese(Simplified)
Messenger Group 9 514-6701 English/Mongolian
Update indication display software to 521-5124 Monitor Software Gp (990K and 844K) per Service Magazine, M0078260, "New Monitor Software Is Now Available for Certain Cat ® Products".