SCRAPER 6V0009 - Caterpillar

Installation Procedure
Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary. Lubricate the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00615170
Illustration 2 g00615172
Position a lifting device to steering solenoid and relief valve (1). Secure the lifting device to a hoist.
Install steering solenoid and relief valve (1). The weight of steering solenoid and relief valve (1) is approximately 36 kg (80 lb).
Install three bolts (14) and washers to steering solenoid and relief valve (1).
Illustration 3 g00615150
Connect wire assembly (13) at the electrical connection.
Connect wire assembly (12) at the electrical connection.
Connect wire assembly (11) at the electrical connection.
Illustration 4 g00615147
Connect hose assembly (9) and (10).
Connect hose assembly (8).
Illustration 5 g00615137
Connect hose assembly (5), (6) and (7).
Connect hose assembly (2), (3) and (4).
Check steering hydraulic tank fluid level. Start the engine and run the engine in order to circulate hydraulic fluid through the steering solenoid and relief valve (1).