SCREEN 1284111 - Caterpillar

Retrieval of Machine
If the machine cannot be lifted, use the following guidelines in order to retrieve the machine.
Illustration 1 g00655586
Illustration 2 g00540783
The strength of the line should be at least 1.5 times the gross weight of the machine.
Provide shielding in order to protect the operator if the line breaks.
Attach the line to the eyes. Two eyes (1) are located on the front of the machine and two eyes (2) are located on the rear of the machine. Do not attach the line to any other point on the machine. Do not attach the line to only one eye when you are retrieving the machine.
If a single line is used to pull the machine, then the line must be a minimum of 3 m (10 ft). If two lines are used to pull the machine, then each line must be a minimum of 1.5 m (5.0 ft).
Do not exceed a maximum pull angle of 20 degrees in any direction.
Illustration 3 g00666181
Each of the lines (3) must be a minimum of 1.5 m (5.0 ft).
Do not drag the machine for long distances. Damage to the tires and to the machine may occur.