SCREEN 1C4267 - Caterpillar

Start By:a. remove axles (outer axle only) 1. Remove three bolts (2) an even distance apart from the final drive, and install three 5/8 in - 11 NC x 4 in. (101.6 mm) bolts (1).2. Remove the remainder of bolts (2), and slide the final drive planet carrier out on bolts (1). 3. Adjust bracket (4) on Tooling (A) until dimension (X) is 254 mm (10 in). 4. Fasten a hoist and Tooling (A) to the final drive planet carrier. Remove three bolts (1) and final drive planet carrier (3). The weight of the final drive planet carrier is 41 kg (90 lb). 5. Remove O-ring seal (4) from final drive planet carrier (3). 6. If necessary, remove seal (5) from the spindle. If it is necessary to disassemble the planet carriers, see Disassemble And Assemble Final Drives.Install Final Drive Planet Carriers (In Chassis)
1. If seal (1) was removed, use Tool (A), and install seal (1) in the spindle. Install the seal with the lip of the seal toward the spindle. 2. Install O-ring seal (3) in final drive planet carrier (2). 3. Fasten a hoist and Tooling (B) to final drive planet carrier (2). Put the final drive planet carrier in position in the final drive housing, and install three 5/8 in - 11 NC × 4 in. (101.6 mm) bolts (4) spaced evenly apart. 4. Install bolts (5) that hold final drive planet carrier (2) in position.5. Remove three bolts (4), and install the remaining bolts (5).End By:a. install axles (outer axle only)