SCREEN AS 2043802 - Caterpillar

Illustration 1 g03889379
Table 1
Specification for 242-2938 Hoe Stick Gp
Item Qty Part Specification Description
All the bores must be free of paint. Coat all the bores for the pins with 5P-0960 Grease Cartridge.
1 As required, use the following shims in order to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
1 133-2425 Shim Thickness is 0.50 mm (0.020 inch).
1 093-0115 Shim Thickness is 2.00 mm (0.079 inch).
2 As required, use the following shims in order to adjust the maximum lateral clearance of 0.8 mm (0.03 inch):
1 093-0083 Shim Thickness is 1.00 mm (0.039 inch).
1 7Y-2498 Shim Thickness is 1.60 mm (0.063 inch).
3 1 111-8443 Pin As Diameter is 79.85 0.04 mm (3.144 0.002 inch).
4 2 8T-4780 Bolt Torque to 325 40 N m (240 30 lb ft).
5 2 096-0854 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
6 2 111-7604 Bushing Bore before assembly is 80.25 0.02 mm (3.159 0.001 inch).
Installation depth is 7.5 0.5 mm (0.30 0.02 inch).
7 1 202-3165 Pin As Diameter is 79.950 0.025 mm (3.1476 0.0010 inch).
8 2 194-5039 Bushing Bore before assembly is 90.27 0.02 mm (3.554 0.001 inch).
Installation depth is 7.5 0.5 mm (0.30 0.02 inch).