SCREEN AS 2753470 - Caterpillar

Install support assembly (10) as shown. Install the Tees, connectors, elbows, and pressure sensors in the ports of the main control valve as shown.Note: Apply a thin coating of hydraulic oil to the outer diameter of the external threads of each pressure sensor group (15) before installation.
Illustration 5 g06199295
(22) 148-8378 Elbow As. 24 2 N m (18 1 lb ft) port "P2"
Install the elbow in the port of the control manifold group as shown.
Illustration 6 g06199303
(7) 164-6874 Elbow Fitting
(8) 168-1968 Tee As
(11) 285-2663 Fitting As
(25) 164-5567 Quick Disconnect Coupler As
(27) 5P-7462 Clip
(28) 5P-7463 Clip
(29) 6V-0683 Grommet
(30) 6V-0852 Dust Cap
(32) 8T-4121 Hard Washer
(36) 8T-4195 Bolt
Install the components in port"Pn1"of the pump head group as shown. Install the clips as shown.
Illustration 7 g06199306
(6) 150-4027 Tee As
(11) 285-2663 Fitting As
(25) 164-5567 Quick Disconnect Coupler As
(30) 6V-0852 Dust Cap
Install the components in port "Pn2"of the pump head group as shown.
Illustration 8 g06199310
(14) 296-7226 Hose As
(18) 398-2288 Pump Control Valve Gp
Install pump control valve group (18) as shown. Install hose assembly (14) as shown.
Illustration 9 g06199804
(12) 286-6815 Hose As
Install hose assembly (12) as shown.
Illustration 10 g06199825
(1) 4I-0821 Hose As
(9) 282-7092 Grommet
(17) 372-9753 Hose As
(19) 468-0485 Hose As
(20) 477-0626 Hose As
(31) 7K-1181 Cable Strap
Install hose assemblies (1), (17), (19), and (20) as shown.
Illustration 11 g06199870
(9) 282-7092 Grommet
(19) 468-0485 Hose As
(20) 477-0626 Hose As
(31) 7K-1181 Cable Strap
Install hose assemblies (19) and (20) as shown.
Illustration 12 g06199876
(17) 372-9753 Hose As
(21) 148-8336 Connector As
Install connector assembly (21) in the pilot lines group, and install hose assembly (17) as shown.
Unless specified, tighten all fittings and hardware to standard torque.
Illustration 13 g00687600
Check for leaks.