SCREEN AS 3640986 - Caterpillar

Refer to Operation and Maintenance Manual, "Engine Starting With Jump Start Cables" for more information.Explosion Hazard (8)This warning is located on the engine and on the air filter cover.
Illustration 12 g01372254
Explosion Hazard! Spraying uncontrolled ether into the air inlet system can cause explosions or fire that may result in personal injury or death. Read and follow the starting procedures in the Operation and Maintenance Manual.
Do Not Operate (9)This warning is located on the engine.
Illustration 13 g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Engage Safety Lock Pin (10)This warning is located on the bracket on the underside of the cab.
Illustration 14 g01381179
Crush Hazard! Improper securing of a tilted cab can cause the cab to fall resulting in serious injury or death. Install the safety lock pin to prevent the cab from falling before working under a tilted cab.Refer to the Operation and Maintenance Manual for the correct cab tilting procedure.
Refer to Operation and Maintenance Manual, "Engine Valve Lash - Check" for more information.Hot Coolant Under Pressure (11)This warning is located on the inside of the door for the radiator filler cap and inside the rear access door on the underside of the machine.
Illustration 15 g01378799
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Level - Check" for more information.High Pressure Fuel (12)This warning is located on the right side of the engine on the fuel manifold.
Illustration 16 g01381180
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Refer to Operation and Maintenance Manual, "Fuel System - Prime" for more information.Rotating Fan Blades (13)When the access door at the rear of the machine is open, this safety message is located on the top right corner of the swingout fan assembly.
Illustration 17 g02114593
Rotating fan blades can result in injury or death.Stop the engine and allow the fan to come to a complete stop before opening the guard door.When the cooling package is to be inspected or cleaned, turn the battery disconnect switch to OFF and remove the key.Before starting the engine, make sure the external finger guard is installed and the guard door is closed. Do not allow any tools or equipment to protrude or vibrate into the path of the rotating fan blades.
Refer to Operation and Maintenance Manual, "Radiator Core - Clean" for more information.