SCREEN AS 3960751 - Caterpillar

Damper (7) - Lift the handle to decrease the firmness of the ride. Push down on the handle to increase the firmness of the ride.
Seat Cushion Tilt (8) - Lift the seat pan to adjust the angle of the seat cushion. Move the seat pan slightly forward and up or slightly rearward and down. Release the seat pan to lock the seat cushion into the desired position.
Lumbar Support (9) - Turn knob counterclockwise to increase the amount of support to the lower back. Turn knob clockwise to decrease the amount of support to the lower back.
Armrest Angle (10) - Rotate the knob on the bottom of each armrest to adjust the angle of the armrest when the armrests are lowered.For information on the seat belt and the three-point operator restraint, refer to Operation and Maintenance Manual, "Seat Belt".Premier Seat
Illustration 2 g06078295
Typical example
Headrest (1) - Move the headrest up or down to adjust the vertical height of the headrest. Move the top of the head rest forward or rearward to adjust the angle of the headrest.
Armrest Angle (2) - Rotate the knob on the bottom of the armrest to adjust the angle of the armrest when the armrest is lowered. Armrest can be rotated to a fully vertical position if needed.
Heat/Vent Selector (If Equipped with Heated and Ventilated Seat) (3) - The heat/vent selector switch controls the action of switch (6). To select seat heater or seat ventilation, press the corresponding side of the switch.
Backrest Angle (4) - Lift the handle to release the locking mechanism for the backrest. Move the backrest to the desired position and release the handle to lock the backrest in position.
Ride Indicator (5) - The ride indicator will indicate optimum quality of the ride by determining if the suspension is adjusted too high or too low. With your weight on the seat, the indicator should be in the green range. If the indicator line is outside the green range, adjust the height adjustment accordingly.
Seat Heater (If Equipped with Heated Seat) (6) - If equipped with seat heater, switch (6) is a two position switch. The top position will activate the heater. The bottom position will turn off the heater.
Seat Heater/Ventilation (If Equipped with Heated and Ventilated Seat) (6) - If equipped with seat heater and seat ventilation, switch (6) is a three position switch. The switch will activate either the heater or ventilation, depending on the position of switch (3). The top position will activate the seat heater/ventilation on high. The middle position will turn off the seat heater/ventilator. The bottom position will activate the seat heater/ventilation on low.
Height Adjustment (7) - To move the seat downward or upward, press the corresponding side of the switch.
Fore/Aft Adjustment (8) - Lift the handle to move the entire seat forward or backward. Release the handle to lock the seat into the desired position.
Damper (9) - Lift the handle to decrease the firmness of the ride. Push down on the handle to increase the firmness of the ride.
Seat