SCREEN AS 4Z8900 - Caterpillar

Intended Use
Note: All data is approximate. The data depends on the work tool, tires, and the machine configuration.This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket or another work tool for the principal intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel. Additional work tools allow this machine to perform other specific tasks.Application/Configuration Restrictions
Refer to machine data below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.With full fluids, the maximum fore and aft continuous slope operation for proper lubrication is 30 degrees.This machine is approved for use in environments with no explosive gases.938H Wheel Loader
Standard Model
These machines are equipped with a C6.6 Diesel Engine. Basic machine specifications are listed in the following tables with the following conditions:
Michelin XHA L3 radial tires
Full fuel tank
Full fluids
Air conditioning
Ride control
Operator
Power train guard
158-7481 bucket
Illustration 1 g01071412
Table 1
938H Wheel Loader
Operating Weight 15059 kg (33199 lb)
Height over ROPS (A) 3356 mm (132 inch)
Length with Bucket (B) 7342 mm (289 inch)
Width over the Tires (Maximum Load) 2674 mm (105 inch)
Counterweight (Standard) 636 kg (1402 lb) High Lift Loader
Illustration 2 g01071025
Table 2
938H Wheel Loader
Operating Weight 15318 kg (33770 lb)
Height over ROPS (A) 3356 mm (132 inch)
Length with Bucket (B) 7832 mm (308 inch)
Width over the Tires (Maximum Load) 2674 mm (105 inch)
Counterweight (Standard) 779 kg (1717 lb) IT38H Integrated Toolcarrier
Standard Model
These machines are equipped with a C6.6 Diesel Engine. Basic machine specifications are listed in the following tables with the following conditions:
Michelin XHA L3 radial tires
Full fuel tank
Full fluids
Air conditioning
Ride control
Operator
Power train guard
Illustration 3 g01071028Note: The work tool is a 127-4920 material handling bucket with a bolt-on cutting edge.
Table 3
IT38H Integrated Toolcarrier
Operating Weight 16004 kg (35282 lb)
Height over ROPS (A) 3356 mm (132 inch)
Length with Bucket (B) 7543 mm (297 inch)
Width over the Tires (Maximum Load) 2674 mm (105 inch)
Counterweight (Standard) 1352 kg (2981 lb) Pallet Fork
Illustration 4 g01071030Note: The work tool is a 103-8598 pallet fork.
Table 4
IT38H Integrated Toolcarrier
Operating Weight 15695 kg (34602 lb)
Height over ROPS (A) 3356 mm (132 inch)
Length with Pallet Fork (B) 7997 mm (315 inch)
Width over the Tires (Maximum Load) 2674 mm (105 inch)
Counterweight (Standard) 1352 kg (2981 lb)