SCREEN GP 6E5471 - Caterpillar

The SAE standard engine crankshaft rotation is counterclockwise when the crankshaft is viewed from the flywheel end.
Illustration 1 g00782226
Cylinder and valve locations (A) Inlet valves (B) Exhaust valves
Table 1
Crankshaft Positions for Valve Lash Setting
Standard Counterclockwise Rotation    
Engine     Stroke for the Number 1 Piston at Top Center Position (1)     Inlet Valves     Exhaust Valves    
G3408C     Compression Stroke     1-2-5-7     1-3-4-8    
Exhaust Stroke 3-4-6-8     2-5-6-7    
Firing order 1-8-4-3-6-5-7-2    
( 1 ) Put the No. 1 Piston at the top center (TC) position and identify the correct stroke. Refer to Testing And Adjusting, "Finding the Top Center Position for the The No 1 Piston". Find the top center (TC) position for a particular stroke and make the adjustment for the correct cylinders. Remove the timing bolt. Turn the flywheel by 360 degrees in the direction of normal engine rotation. This will put the No. 1 piston at the top center (TC) position on the other stroke. Install the timing bolt in the flywheel and complete the adjustments for the cylinders that remain.