AVSPARE.COM
parts catalog

SCREW 0005381 - Caterpillar



0005381 SCREW Caterpillar parts SCREW
Rating:
81
Alternative (cross code) number:
CA0005381
000-5381
0005381
Caterpillar 0005381 SCREW

Buy SCREW 0005381 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


If the valve speed is adjusted too high the AccuGrade system will over correct during blade movement and produce an uneven grade. If the valve speed is adjusted to low the AccuGrade system will not correct blade movement fast enough resulting in an uneven grade.Refer to Illustration 1 for an example of the profile of the grade versus the valve speed adjustment.
Illustration 1 g01086253
Adjustment of the "<- Valve Speed ->" is needed when both the lift valve and the tilt valve appear to be too slow or too fast.Increase the "<- Valve Speed ->" if both the lift valve LED's and the tilt valve LED's remain in the raise or lower amber color for a long duration of 2 seconds or more. Decrease the "<- Valve Speed ->" if both the lift valve LED's and the tilt valve LED's pass through the green on grade and go into the amber color and both the lift and tilt functions are erratic.Adjust the valve speed in incremental changes of 2 percent.Adjustment of the "<- Valve Speed" is needed when the lift function appears to be too slow or too fast.Increase the "<- Valve Speed" if the lift LED's remain in the raise or lower amber color for a long duration of 2 seconds or more. Decrease the "<- Valve Speed" if the lift LED's pass through the green on grade and go into the amber color and the lift function is erratic.Adjust the valve speed in incremental changes of 2 to 5 percent.Adjustment of the "Valve Speed ->" is needed when the tilt function appears to be too slow or too fast.Increase the "Valve Speed ->" if the tilt LED's remain in the raise or lower amber color for a long duration of 2 seconds or more. Decrease the "Valve Speed ->" if the tilt LED's pass through the green on grade and go into the amber color and the tilt function is erratic.Adjust the valve speed in incremental changes of 2 to 5 percent.In order to customize the valve speed, perform the following procedure:Note: This procedure will be used for any of the options that are selected from the valve speed menu.
Place the power/setup switch in the "i" position.
Toggle either the right mast elevation/menu scroll switch or the left mast elevation/menu scroll switch until Valve Speed is highlighted on the display.
Press the OK/right reset button.A menu similar to Illustration 2 appears for a Dual Mast system.A menu similar to Illustration 3 appears for a Single Mast system.
Illustration 2 g00994383
Valve Speed Menu for the Dual Mast System
Illustration 3 g01036333
Valve Speed Menu
Select from the following valve speed options using either of the Menu Scroll switches:"<- Valve Speed ->" - This option allows you to set the speed for both the Lift valve and the Tilt valve."<- Valve Speed" - This option allows you to set the speed for the Lift valve only. Single Mast System and Dual Mast System"Valve Speed ->" - This option allows you to set the speed for the Tilt valve


Parts screw Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.