SCREW & WASHER 0455528 - Caterpillar

Illustration 1 g02292557When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseSpecifications System voltage ... 24 VThe B+ terminal must be mounted below the horizontal at a maximum angle of ... 60 DegreesNo load performance at 25° C (77° F) Speed ... 4060 rpmCurrent ... 142 ampVoltage ... 22.5 VOperating temperature range of the starting motor ... −32° C to +125° C (−26° F to 257° F) (1) Battery terminal Maximum number of cable or wire terminals between the nuts ... 3A maximum of two cable terminals can be larger than ... 0 AWGTighten the nut on the battery terminal to the following torque. ... 24 2 N m (18 1 lb ft) (2) Solenoid mounting bolts Tighten the nut on the ground terminal to the following torque. ... 8.75 1.05 N m (77.44 9.29 lb in) (3) Switch terminal Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (19.91 2.21 lb in) (4) Ground terminal Tighten the nut on the ground terminal to the following torque. ... 24 2 N m (18 1 lb ft) (A) Pinion engaged ... 69.9 mm (2.75 inch) (B) Pinion disengaged ... 47.7 2.5 mm (1.88 0.098 inch)