AVSPARE.COM
parts catalog

SCREW 0544514 - Caterpillar



0544514 SCREW Caterpillar parts SCREW
Rating:
41
Alternative (cross code) number:
CA0544514
054-4514
0544514
Caterpillar 0544514 SCREW
Weight: 0.05 pounds 0 kg.

Buy SCREW 0544514 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


ACTION REQUIRED
Replace the inner 6Y-6339 and outer 2190615/">219-0615 Seal Groups if either is leaking. The 2190615/">219-0615 HDDF seal will leak externally. The 6Y-6339 inner duo cone seal will leak into the axle, causing the axle to overfill.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-10000 hrs,
61-96 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 6.0-hour job
A separate claim will need to be submitted for each wheel group with leaking 2190615/">219-0615 outer duo cone seals or 6Y-6339 inner duo cone seals. Document the wheel group on the machine that was repaired in the "Additional Comments" section of the warranty claim. For example left front, right front, left center, or right center.
This program will cover after failure resultant damage parts and required labor. Explain the resultant damage, additional parts and labor required in the claim story.
If there has been a previous 2190615/">219-0615 or 6Y-6339 repair, part age will apply. Retain documentation of the previous repair in the dealer's records for audit purposes, and specify repair date and machine hours in the " additional Comments" section of the warranty claim.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Remove the tire and rim. Refer to Disassembly and Assembly, "Tire and Rim - Remove".
Remove the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Remove".
Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
To disassemble the wheel group and remove the duo cone seal reference the Disassembly and Assembly,RENR5138-06, "Wheel and Duo-Cone Seals (Front and Center) - Remove".
For machines fitted with mechanical brake slack adjusters refer to Service Magazine, SEPD0812, ?Changes Have


Parts screw Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.