SCREW/BOLT 0832143 - Caterpillar

Illustration 1 g00920830
Remove the hydraulic oil filler cap.
Wash the hydraulic cap in a clean, nonflammable solvent.
Open the remote drain hose. Drain the oil into a suitable container.
Allow the oil to completely drain. Dispose of the used oil according to local regulations.
Close the remote drain hose.
Change the hydraulic oil filter.
Fill the hydraulic tank with clean, filtered hydraulic oil. Refer to the Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank.
Clean the cap for the hydraulic oil tank.
Install the cap for the hydraulic oil tank.
Illustration 2 g00920885
Check the hydraulic oil level when the oil is warm. The oil level should be between the high mark and the low mark on the sight gauge.