SCREW-MACHINE 0962617 - Caterpillar

To prevent personal injury, release the pressure from the hydraulic system before any hoses are disconnected or removed.
1. Drain the oil from the hydraulic tank. 2. Disconnect tube assembly (1) from steering reversing valve (3).3. Disconnect hose assemblies (2) and (4) from the steering reversing valve.4. Remove three bolts (5), and remove steering reversing valve (3) from the front frame. The following steps are for the installation of the steering reversing valve.5. Position steering reversing valve (3) on the front frame, and install three bolts (5) that hold it in place. Tighten the bolts to a torque of 35 3 N m (26 2 lb.ft.).6. Connect tube assembly (1) and hose assemblies (2) and (4) to the steering reversing valve.7. Fill the hydraulic system with oil to the correct level. See the Maintenance Guide.End By:a. separation of steering frame lock linkDisassemble And Assemble Steering Reversing Valve
Start By:a. remove steering reversing valve 1. Remove plugs (4), springs (3) and valves (2) from manifold (1). 2. Remove bearing (5) and O-ring seal (6) from plugs (4). 3. Remove plugs (9), springs (8) and valves (7) from manifold (1). 4. Remove bearing (10) and O-ring seal (11) from plugs (9). The following steps are for assembly of the steering reversing valve.5. Install bearing (10) and O-ring seal (11) in plugs (9).6. Install valves (7), springs (8) and plugs (9) in manifold (1). Tighten the plugs to a torque of 135 10 N m (100 7 lb.ft.).7. Install bearing (5) and O-ring seal (6) in plugs (4).8. Install valves (2), springs (3) and plugs (4) in manifold (1). Tighten the plugs to a torque of 100 5 N m (75 4 lb.ft.).End By:a. install steering reversing valve