1456669 SCREW-SELF-TAPPING Caterpillar parts
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 621H, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777F, 77...
Rating:
Alternative (cross code) number:
CA1456669
145-6669
1456669
CA1456669
145-6669
1456669
Weight: 0.01 pounds 0 kg.
INTEGRATED TOOLCARRIER, WHEEL TRACTOR,
Compatible equipment models: 1456669:
INTEGRATED TOOLCARRIER
IT38H
MOTOR GRADER
120M
120M 2
12M
12M 2
12M 3
12M 3 AWD
140M
140M 2
140M 3
140M 3 AWD
14M
160M
160M 2
160M 3
160M 3 AWD
16M
SOIL COMPACTOR
825K
Number on catalog scheme:
2
For full view, you need register
Information:
Conditions Which Generate This Code:
Illustration 1 g01363233
Connections of the J1939 Data Link circuitThis diagnostic code is recorded when the ECM stops receiving information on the J1939 Data Link.Note: The resistance of the J1939 circuit should measure approximately 120 ohms between circuit components.Test Step 1. INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Inspect all harness connections that are related to the J1939 Data Link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating. Ensure that all the seals are present and in place.
Check the harness for signs of damage or abrasion.
Check the wires at the connector. Ensure that the wires are secured tightly into the connector. Take care not to pull the wire out of the connector.
Check the exposed wires at the connectors for nicks or signs of abrasion.
Check for moisture inside the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Ensure that the contacts are properly installed. The contacts should mate correctly when the two pieces of the connector are placed together. Expected Result:The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to Test Step 2.
NOT OK - The machine harness connectors are in need of repair.Repair: Repair the machine harness or replace the machine harness. STOPTest Step 2. CHECK FOR SHORTS TO GROUND
The disconnect switch remains in the OFF position.
Disconnect the machine harness connectors from all electronic control modules that use the CAN data link.
At the machine harness for the ECM, measure the resistance between frame ground and connector contacts J2-67 (wire F711-GN) and J2-68 (wire F712-GY) of the data link circuit. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The harness circuit resistance is correct. Proceed to Test Step 3.
NOT OK - The resistance is less than 5000 ohms. The machine harness has failed. Repair: There is a short between frame ground
Illustration 1 g01363233
Connections of the J1939 Data Link circuitThis diagnostic code is recorded when the ECM stops receiving information on the J1939 Data Link.Note: The resistance of the J1939 circuit should measure approximately 120 ohms between circuit components.Test Step 1. INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Inspect all harness connections that are related to the J1939 Data Link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating. Ensure that all the seals are present and in place.
Check the harness for signs of damage or abrasion.
Check the wires at the connector. Ensure that the wires are secured tightly into the connector. Take care not to pull the wire out of the connector.
Check the exposed wires at the connectors for nicks or signs of abrasion.
Check for moisture inside the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Ensure that the contacts are properly installed. The contacts should mate correctly when the two pieces of the connector are placed together. Expected Result:The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to Test Step 2.
NOT OK - The machine harness connectors are in need of repair.Repair: Repair the machine harness or replace the machine harness. STOPTest Step 2. CHECK FOR SHORTS TO GROUND
The disconnect switch remains in the OFF position.
Disconnect the machine harness connectors from all electronic control modules that use the CAN data link.
At the machine harness for the ECM, measure the resistance between frame ground and connector contacts J2-67 (wire F711-GN) and J2-68 (wire F712-GY) of the data link circuit. Expected Result:The resistance is greater than 5000 ohms. Results:
OK - The resistance is greater than 5000 ohms. The harness circuit resistance is correct. Proceed to Test Step 3.
NOT OK - The resistance is less than 5000 ohms. The machine harness has failed. Repair: There is a short between frame ground
Cat SIS web machinery list:
Parts screw Caterpillar catalog:
16M, 24H, 320C FM, 320D, 320D FM, 322C, 322C FM, 324D FM, 324D FM LL, 325C FM, 325D FM, 330C FM, 330D FM, 375, 375 L, 5130, 5130B, 515, 5230, 5230B, 525, 525B, 533, 535B, 543, 545, 572R, 621G, 623G, 6...
D4H, D5H, D5HTSK II, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6R, D6R II
D4H, D5H, D5HTSK II, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6R, D6R II
320C, 320D FM, 330, 330B, 330B L, 330C, 330C L, 345B, 345B II, 345B II MH, 345B L, 5130, 5130B, 5230, 543, 583T, 587R, 587T, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 797, 844H, 988F, 988F II, 990H, D...
4S, 5S, 6A, 6S, 815B, 815F, 815F II, 854G, D4E, D5B, D5H XL, D6D, D6E, D6E SR, D6G, D6G SR, D6H, D6H II, D6N, D6R
518, 518C, 528, 528B, 530B, 561H, 561M, 611, 613C, 613C II, 613G, 615C, 623B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 824C, 825C, 844, 844H, 844K, 916, 926, 928H, 936, 936F, 943, 950B, 950B...
966D, 966F, 966F II, 970F, 973, 980G, D10N, D10R, R1300, R1300G, R1300G II, R1600, R1600G, R1600H
561N, 572R, 572R II, D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R II, D7R, D7R II
8A, 8S, D8N, D8R, D8R II, D8T
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 2470C, 2570C, 2670C, 2864C, 515, 518, 518C, 525, 525B, 525C, 525D, 533, 535B, ...
621F, 623E, 623F, 627F, 814F, 814F II, 815F, 815F II, 816F, 816F II, 914G, 924F, 928F, 928G, 938F, 938G, 950F, 950F II, 950G, 950G II, 960F, 962G, 962G II, 966F, 966F II, 966G, 966G II, 970F, 972G, 97...
16, 525B, 525C, 535B, 535C, 545, 545C, 611, 613G, 615, 615C, 772, 814B, 814F, 815B, 815F, 816F, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 938F, 938G, 938G II, 938H, 950B, 950B/950E, 950...
1508160
SCREW
953C, 963C, 973C
953C, 963C, 973C
2414007
SCREW-LOCK
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 973C, 973D, CB-564D, CP-68B, CP-74B, CS-56B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B, PS-360C
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 973C, 973D, CB-564D, CP-68B, CP-74B, CS-56B, CS-66B, CS-68B, CS-74B, CS-76B, CS-78B, PS-360C
5130, 517, 5230, 527, 621E, 623E, 627E, 631E, 637E, 651E, 657E, 955L, D10, D10N, D10R, D11N, D11R, D4E, D4H, D4H XL, D4HTSK II, D4HTSK III, D5B, D5H, D5H XL, D5HTSK II, D5M, D6D, D6H, D6H XL, D6H XR, ...
24H, 5130, 5130B, 5230, 5230B, 561M, 572R, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 775B, 775D, 776C, 776D, 777D, 784B, 784C, 785B, 785C, 789B, 789C, 793B, 793C, 814F, 815F, 816F, 824C, 824G, 825G, 82...
6P6926
SCREW-KNURLED
583T, 584, 587R, 587T, 943, 953, 955L, 963, 973, 977L, D10, D10N, D10R, D11N, D11R, D4E, D5B, D6D, D6R, D7G, D7R, D8K, D8L, D8T, D9L, D9N, D9R, PL83, PL87
583T, 584, 587R, 587T, 943, 953, 955L, 963, 973, 977L, D10, D10N, D10R, D11N, D11R, D4E, D5B, D6D, D6R, D7G, D7R, D8K, D8L, D8T, D9L, D9N, D9R, PL83, PL87
16M, 24H, 320C FM, 320D, 320D FM, 322C, 322C FM, 324D FM, 324D FM LL, 325C FM, 325D FM, 330C FM, 330D FM, 375, 375 L, 5130, 5130B, 515, 5230, 5230B, 525, 525B, 533, 535B, 543, 545, 572R, 621G, 623G, 6...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
3193522
SCREW-TRUSS HEAD
D6R II, D6R III
D6R II, D6R III
508, 613C, 814B, 815B, 824C, 826C, 834B, 836, 950B, 950F, 966F, 980C, 980F, 988B, 992C, 994, D250B, D250D, D25D, D300B, D6H, D6H XL, D6H XR, D6N, D6R, D6R II, D6R III, D6T, D7R, D7R II, D8N, D8R, D8R ...
D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR, D8R II
572R, 572R II, 583T, 587T, 814F, 815F, 816F, 924F, 938F, 950F II, 960F, 966F, 966F II, 970F, D10R, D10T, D11R, D11T, D5M, D6H, D6H II, D6H XL, D6H XR, D6M, D6R, D6R II, D6R III, D6R STD, D6T, D7H, D7R...
2500846
SCREW-PAN HEAD
D6R II
D6R II