SCREW-PURGE 1460006 - Caterpillar

Illustration 1 g03889061
Table 1
Specification for 241-0297 Hoe Stick Gp    
Item    Qty    Part    Specification Description    
All the bores must be free of paint. Coat all the bores for the pins with 5P-0960 Grease Cartridge.    
1     As required, use the following shims in order to adjust the maximum lateral clearance of
0.8 mm (0.03 inch):    
1 133-2424 Shim     Thickness is
0.50 mm (0.020 inch).    
1 093-0118 Shim     Thickness is
2.00 mm (0.079 inch).    
2     As required, use the following shims in order to adjust the maximum lateral clearance of
0.8 mm (0.03 inch):    
1 093-0086 Shim     Thickness is
1.00 mm (0.039 inch).    
1 7Y-2496 Shim     Thickness is
1.60 mm (0.063 inch).    
3     1     188-3917 Pin As     Diameter is
69.950 0.025 mm (2.7539 0.0010 inch).    
4     2     8T-4780 Bolt     Torque to
325 40 N m (240 30 lb ft).    
5     2     096-0854 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
6     2     4I-0453 Bushing     Inside diameter before assembly is
80.25 0.02 mm (3.159 0.001 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).
7     1     228-6178 Pin As     Diameter is
69.95 0.04 mm (2.754 0.002 inch).    
8     2     093-1434 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
9     2     113-4982 Bushing     Inside diameter before assembly is
70.23 0.02 mm (2.765 0.001 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).