SCREW-FLAT HEAD 1600018 - Caterpillar

Secondary steering diverter valve (7) and secondary steering pump (8) are mounted to the output transfer gears for the transmission.Case drain filter (32) for the left steering pump is mounted to the engine end frame on the left side of the machine. The case drain filter for the right steering pump is mounted to the engine end frame on the right side of the machine. Filter bypass switches (33) are installed into the filter base of the case drain filters.
Illustration 4 g00582710
Location of the Screens for the Steering Pump Output (12) Differential pressure switch. (13) Screen.The VIMS refers to the screens for the steering pump output as "STRG OIL FLTR".Screens (13) for the steering pump output are located in the compartment behind the operator compartment. The screens are mounted to the left side of the engine end frame. Differential pressure switches (12) are installed on the screens.
Illustration 5 g00662155
Locations of the steering control valve and the selector and pressure control valves.Steering control valve (14). Pilot selector and pressure control valve (30). Steering selector and pressure control valve (31) .Steering control valve (14) is located in the compartment behind the operator compartment. The steering control valve is mounted to the right side of the engine end frame. The pilot selector and pressure control valve (30) is attached to the engine end frame below the steering control valve. The steering selector and pressure control valve (31) is mounted on the steering control valve.
Illustration 6 g00582713
Location of the Steering Pumps (16) Pressure and flow compensator valve. (24) Left steering pump. (29) Right steering pump.Pressure and flow compensator valves (16) are mounted on the steering pumps. Steering pumps (24) and (29) are located in the compartment behind the operator compartment. The steering pumps are mounted on the front side of the rear pump drive.
Illustration 7 g00582716
Location of Hydraulic tank and Filter (19) Filter for the oil cooler circuit in the steering and brake system. (34) Hydraulic tank for the steering and brake systems.The VIMS refers to the filter for the steering and brake systems as "STRG COOL FLTR".
Illustration 8 g00582717
View of the Pressure Switch for the Filter (19) Filter for the steering and brake systems. (20) Pressure switch.Filter (19) and hydraulic tank (34) are located in the compartment above the rear pump drive. Pressure switch (20) is installed in the filter for the steering and brake systems.
Illustration 9 g00662162
Location of the gear pump for the oil cooler circuit in the steering and brake system (21) Gear pump for the oil cooler circuit in the steering and brake systemGear pump (21) is located in the compartment that is in front of the engine compartment. Access is gained by removing the panel on the left side of the engine end frame. The gear pump is mounted on the back side of the rear pump drive.
Illustration 10 g00582719
Location of the Left Steering Neutralizer Valve (22) Left steering neutralizer valve.Left steering neutralizer valve (22) is located under the operator compartment. The right steering neutralizer valve is also located under the operator compartment. The