SCREW-TAPPING 2457948 - Caterpillar

Illustration 16 g01372254This safety message is located inside the left front compartment on the engine air filter.
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting" for further information.Relieve Hydraulic Tank Pressure (14)
Illustration 17 g01371640This safety message is located on top of the hydraulic tank.
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
Pressurized System (15)
Illustration 18 g01371640This safety message is located on top of the radiator, next to the filler cap.
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for further information.Crushing Hazard (16)
Illustration 19 g01374060This safety message is located on both sides of the back end of the machine.
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Jump Start Cables (17)
Illustration 20 g01370909This safety message is located inside the left front compartment.
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.High-Pressure Cylinder (18)
Illustration 21 g01076729This safety message is positioned on the track adjuster on both sides of the machine.
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the adjustment procedure.High-Pressure Gas (19)
Illustration 22 g01374065This safety message is located on the accumulator in the right back compartment.
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Refer to Operation and Maintenance Manual, "Equipment Lowering with Engine Stopped" for further information.