parts catalog

SCREW 3905248 - Caterpillar

3905248 SCREW Caterpillar parts SCREW
Alternative (cross code) number:
Caterpillar 3905248 SCREW
Weight: 0.71 pounds 0 kg.

Buy SCREW 3905248 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 2
  For full view, you need register


Illustration 1 g00721168
(1) Banjo bolt Tighten the banjo bolt for the piston cooling jet to the following torque. ... 27 N m (20 lb ft) (2) Piston cooling jetAlignment
Table 1
Required Tools    
Part Number     Part Name     Qty    
FT-2736     Alignment Gauge     1    
Illustration 2 g00712686
To align the piston cooling jet, use the following procedure:
Build an alignment gauge (4) out of 3 mm (0.12 inch) plexiglass. For the correct dimensions, see the print for FT-2736 Alignment Gauge .
Install the alignment gauge on pins (1) of the cylinder head.
Insert a rod (2) that is 1.2 mm (0.05 inch) in diameter into each piston cooling jet. The rods must protrude through holes (3) in order for the piston cooling jet to be aligned properly. If the rods do not protrude through the holes in the alignment tool, bend the piston cooling jet. Check the rods again for correct alignment.
Remove the alignment gauge and the rods.

Caterpillar parts catalog:

Caterpillar parts catalog
TL1055C Telehandler KDE01628-UP (MACHINE) POWERED BY C4.4 Engine
TL1255C Telehandler DHW01422-UP (MACHINE) POWERED BY C4.4 Engine

Parts screw Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.