6D0543 SCREW Caterpillar parts
120, 14E
Rating:
Alternative (cross code) number:
CA6D0543
6D-0543
6D0543
CA6D0543
6D-0543
6D0543
Weight: 0.18 pounds 0 kg.
MOTOR GRADER,
Number on catalog scheme:
9
For full view, you need register
Information:
Replacement Procedure
Note: The configuration from the old ECM can be saved in Cat ET. The configuration can then be uploaded to the new ECM.
The new ECM must be reprogrammed after installation. If the ECM that is being replaced is functional, then make a note of the following items: hour meter, all engine setpoints and any spare inputs or outputs that are programmed. Refer to the System Operation, "Setpoint Programming" section within this document.
Shut down the engine. Remove the positive lead wire from the battery.
Remove the harness connector from the ECM. A 4 mm hex wrench is required in order to turn the fastening screw.
Remove the six nuts that fasten the ECM to the front panel. Remove the ECM.
Place the new ECM in the front panel. Install the six nuts that were previously removed in order to secure the new ECM to the front panel.
Reconnect the harness connector to the ECM and reconnect the positive lead wire to the battery.
Use the values from the original ECM in order to reprogram the setpoints, the spare inputs/outputs, and the hour meter. Refer to Step 1.
Note: The configuration from the old ECM can be saved in Cat ET. The configuration can then be uploaded to the new ECM.
The new ECM must be reprogrammed after installation. If the ECM that is being replaced is functional, then make a note of the following items: hour meter, all engine setpoints and any spare inputs or outputs that are programmed. Refer to the System Operation, "Setpoint Programming" section within this document.
Shut down the engine. Remove the positive lead wire from the battery.
Remove the harness connector from the ECM. A 4 mm hex wrench is required in order to turn the fastening screw.
Remove the six nuts that fasten the ECM to the front panel. Remove the ECM.
Place the new ECM in the front panel. Install the six nuts that were previously removed in order to secure the new ECM to the front panel.
Reconnect the harness connector to the ECM and reconnect the positive lead wire to the battery.
Use the values from the original ECM in order to reprogram the setpoints, the spare inputs/outputs, and the hour meter. Refer to Step 1.
Caterpillar parts catalog:
Parts screw Caterpillar catalog:
120B, 120G, 12E, 12G, 130G, 140B, 140G, 14E, 14G, 1673C, 16G, 215, 215B, 225, 227, 235, 245, 24H, 3208, 3304, 3306, 3406, 3408, 5130, 5130B, 518, 5230, 5230B, 528, 561D, 571G, 572G, 583K, 594, 594H, 6...
120B, 120G, 12E, 12G, 130G, 140B, 140G, 14E, 14G, 160G, 1673, 1676, 16G, 215, 225, 227, 2290, 235, 235B, 2390, 2391, 245, 2491, 24H, 2590, 3116, 3208, 320B, 325B L, 3304, 3304B, 3306, 3306B, 330B L, 3...
1090, 1190, 1190T, 120, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 1390, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 14...
1160, 12E, 140, 14E, 16, 1673, 1673B, 1676, 1693, 215, 3208, 3304, 3306, 3406, 3412, 3508, 3508B, 3512, 3512B, 3516, 3516B, 46, 518, 518C, 528, 528B, 530B, 594, 594H, 613, 613C II, 621, 627, 637D, 651...
120, 120B, 120G, 12E, 130G, 140, 140B, 14E, 235C, 3160, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 589, 594, 621B, 621H, 621K, 623H, 623K, 623K LRC, 627B, 627H, 627K, 627K LRC, 631E, 637D, 637E, 639D,...
10 FT, 10-20B, 10B, 120, 140, 14E, 16, 16G, 3208, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 613C, 621, 621E, 627E, 631E, 641B, 657, 769C, 769D, 771C, 771D, 772, 773B, 773D, 775B, 775D, 776C, 776D, 77...
120G, 12E, 12G, 130G, 140G, 14E, 14G, 160G, 16G, 3126B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3606, 3608, 3612, 3616, 61...
120, 120B, 120G, 12E, 12G, 130G, 140, 140B, 140G, 14E, 14G, 160G, 16G, 3160, 3208, 325B L, 325C, 325D MH, 3304, 3304B, 3306, 330B L, 330C MH, 330D MH, 3406, 3406B, 3408, 3412, 3412C, 345B, 345B II MH,...
10 FT, 10-20B, 10B, 117, 118, 127, 128, 12F, 12G, 130G, 140G, 14E, 14G, 16G, 225, 225D, 30, 3406E, 508, 518, 528, 561B, 561C, 571G, 621B, 623, 623B, 631C, 650B, 651, 657, 657B, 666B, 772, 8 FT, 8-16B,...
120, 12E, 140, 14E, 16, 30/30, 3160, 561B, 578, 583R, 589, 621E, 623E, 627E, 637E, 651, 657, 768B, 768C, 769, 769C, 771C, 772, 772B, 773, 773B, 775B, 776, 776C, 777, 777B, 824B, 834, 955H, 977H, 988, ...
120, 120G, 12F, 12G, 130G, 140G, 14E, 14G, 1673, 16G, 215, 245, 50, 623, 631C, 641B, 651E, 657E, 768B, 769, 772, 773, 920, 930, 950, 966C, 977H, D3, D5, D6D, D8H, D9E, D9G
120, 12E, 12F, 140, 14E, 16, 227, 621, 623, 627B, 631C, 633C, 637D, 641, 641B, 650B, 651, 657, 657B, 666, 769, 773, 8 FT, 815, 816, 824B, 825B, 826B, 834, 910, 920, 930, 930R, 950, 966C, 980, 980B, 98...
6D0557
SCREW
120, 14E
120, 14E
120B, 14E
5H0052
SCREW (4.37" Long)
12E, 14E
12E, 14E
5B2926
SCREW (.50" LONG)
12E, 140, 16
12E, 140, 16
1G0338
SCREW
120B, 140B
120B, 140B
1G1905
SCREW
120B, 140B
120B, 140B
6D3027
SCREW
14E, 16
14E, 16
2S6814
SCREW
16
16
4D0536
SCREW
14E
14E
6D5414
SCREW
12F
12F
120, 14E
120, 14E