AVSPARE.COM
parts catalog

SEAL 0004130 - Caterpillar



0004130 SEAL Caterpillar parts WE-601B SEAL
Rating:
70
Alternative (cross code) number:
CA0004130
000-4130
0004130
Caterpillar 0004130 SEAL

Buy SEAL 0004130 Caterpillar genuine, new aftermarket tractor parts with delivery
WINDROW ELEVATOR,

Compatible equipment models: 0004130:

WINDROW ELEVATOR  WE-601B   Caterpillar
Number on catalog scheme: 29
  
  For full view, you need register

Information:


Turn on the Display.
Toggle the "Power/Setup" Switch (18) to the "i" position in order to access the "Configuration" Menu.
Illustration 2 g01145036
Toggle the "Inc/Dec" switch downward until the "Sensor Calibration" menu is highlighted.
Press the "OK" button (19) in order to enter the "Sensor Calibration" Menu.
Illustration 3 g01102843
Toggle the "Inc/Dec" switch until the "Full Sensor Calibration" menu is highlighted.
Press the "OK" button (19) in order to enter the "Full Sensor Calibration" Menu.
Illustration 4 g01131138
Press the "OK" button (19) in order to start the Calibration.
Illustration 5 g01144019
Illustration 6 g01131139
The screen in Illustration 5 will be displayed until the system verifies that the sensors are stable. Once the system has determined that the sensors are stable, the screen in Illustration 6 will be displayed. Press the "OK" button (19) in order to continue the calibration.Note: If the Blade Slope Sensor, Mainfall Sensor, or Rotation Sensor (4) are not detected or if the null values cannot be read, an error screen will be displayed. Calibration of the sensors will not be allowed until the issue has been resolved.
Illustration 7 g01102846
Illustration 8 g01102851
Press the "OK" button (19) in order to continue.Mark the positions of the two front tires, the two rear tires, and the blade as shown in Illustration 8. Mark the positions of the tires by drawing lines in the dirt or spraying lines on the ground with spray paint.When a "Initial Position" calibration is performed the following actions take place:
The Rotation Sensor (4) is calibrated for the blade
First reading for slope of the blade
First reading for the calibration of the Mainfall SensorNote: If the data from the sensor is not stable the "not OK" icon will be shown on the screen.
Illustration 9 g01102859
Illustration 10 g01102866
Rotate the machine 180 degrees from the original position. Align the blade to the marks that were made at the beginning of the procedure. Refer to Illustration 10.
Rest the blade on the ground. Make sure that all pressure is off the blade.Note: Make sure that the lift cylinders for the blade can be rotated by hand.
Press the "OK" button (19) in order to continue.When a "Blade Position" calibration is performed the following action takes place:
Second reading for slope of the bladeNote: If the data from the sensor is not stable the "not OK" icon will be shown on the screen.
Illustration 11 g01131143
Illustration 12 g01102876
Move the machine forward. Align the tires of the machine to the front and rear marks of the tires that were made previously. Refer to Illustration 12.Note: If you are calibrating on a sloped surface, alignment to the lines for the tires will be more critical for accurate calibration of the Mainfall Sensor.
Once the blade and the machine have been positioned, press the "OK" button (19) .When a "Mainfall Position" calibration is performed the following actions take place:
The second reading for Mainfall SensorNote: If the data from the sensor is not stable the "not OK" icon will be shown on the screen.
Illustration 13 g01131144
Press the "OK" button (19) in order to accept the full calibration.Note: If the "ESC" button is pressed, the calibration is not saved and

Caterpillar parts catalog:

Caterpillar parts catalog
WE-601B WINDROW ELEVATOR 7EC00168-UP (MACHINE)


Parts seal Caterpillar catalog:

1475770 SEAL-U-CUP
365B, 365B L, 375, 5080
1475769 SEAL-BUFFER
365B, 365B L, 375, 385B, 5080
7Y5145 SEAL-BUFFER
320 L, 320N, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 350, 350 L, 5080
1446324 SEAL GP
320B, 322B L, 322B LN, 324D FM, 325B L, 330B L, 345B II, 345B L, 375 L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.