SEAL 0006143 - Caterpillar

Illustration 5 g01098573
Install fittings (27) .
Illustration 6 g01098572
Connect hose assembly (26). Install hose assembly (24). Connect hose assembly (23). Install tube assembly (25) .
Illustration 7 g01098570
Install cover assemblies (22), (21), and (20) .
Illustration 8 g01098569
Position cover assembly (18) in order to connect harness assemblies (19) .
Illustration 9 g01098566
Install cover assembly (18), as shown. Install screws (17) and insulation (16) .
Illustration 10 g01098565
Connect hose assembly (15). Install tube assembly (14) .
Illustration 11 g01098562
Connect tube assemblies (13) .
Illustration 12 g01098559
Install hose assemblies (12) .
Illustration 13 g01098556
Connect tube (11) and hose assembly (10) .
Illustration 14 g01098555
Install bracket assembly (9) and bolts (8) .
Illustration 15 g01098551
Connect hose assemblies (7) .
Illustration 16 g01098550
Connect harness assemblies (6) and (5) .
Illustration 17 g01098530
Position panel (4) and install nut (3) .
Illustration 18 g01098529
Install nuts (2) .
Illustration 19 g01056413
Close access door (1) on the right side of the machine.
Fill the hydraulic tank. The capacity of the hydraulic tank is approximately 29.5 L (7.8 US gal). Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct procedure.End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".