0068350 SEAL-O-RING Caterpillar parts
797, 797B, 797F, 834G, 834H, 836G, 836H, 854G, 988G, 988H, S25
Rating:
Alternative (cross code) number:
CA0068350
006-8350
0068350
CA0068350
006-8350
0068350
Weight: 0.010 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
6.99
mm
DASH SIZE
440
ID
170.82
mm
MATERIAL
Nitrile (NBR) Rubber 90 Duro
OD
0
mm
LANDFILL COMPACTOR, WHEEL LOADER,
Compatible equipment models: 0068350:
Number on catalog scheme:
16
For full view, you need register
Information:
System Operation Description:The electrical power for the engine comes through a 16 amp circuit breaker, the Engine Control Switch (ECS), and the Electronic Control Module (ECM). The system receives battery voltage when the ECS is in the AUTO, START or STOP positions. A signal is provided to the ECM that senses the position of the ECS. When the ECM senses battery voltage on this input, the ECM will power up. If the voltage is removed from the input, the ECM will power down.An emergency stop for engine operation is provided in the starting system. Power to the ECM flows through the breaker for the ECM and the ECM relay. The ECM relay is energized when the ECS is in the AUTO, START or STOP positions and the emergency stop button is not activated. When the emergency stop button is activated, power is removed from the coil of the ECM relay. The contacts of the ECM relay open removing the power to the ECM.The presence of two +Battery connections and two −Battery connections to the ECM reduce harness resistance. All of these connections must be complete in order to ensure proper engine operation.With intermittent faults, you may want to bypass the engine wiring. Bypassing the wiring helps to locate the problem. If the problem is no longer present with the bypass in place, the engine wiring is faulty.
Illustration 1 g01020990
Typical exampleTest Step 1. Check for Connector Damage.
Turn the circuit breaker for the battery to the OFF position.
Turn the ECS to the OFF/RESET position.
Thoroughly inspect the ECM connectors J1/P1 and J2/P2. Inspect all of the other connectors. Refer to the diagnostic functional test Troubleshooting, "Inspecting Electrical Connectors" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector that are associated with the circuit.
Check the ECM connector (allen head screw) for the proper torque of 6.0 N m (55 lb in).
Check the customer connector (allen head screw) for the proper torque of 2.25 0.25 N m (20 2 lb in).
Check the harness and the wiring for abrasion and for pinch points.Expected Result:All connectors, pins, and sockets are completely coupled and/or inserted, and the harness and wiring are free of corrosion, of abrasion or of pinch points.Results:
OK - The connectors and wiring are okay.
Illustration 1 g01020990
Typical exampleTest Step 1. Check for Connector Damage.
Turn the circuit breaker for the battery to the OFF position.
Turn the ECS to the OFF/RESET position.
Thoroughly inspect the ECM connectors J1/P1 and J2/P2. Inspect all of the other connectors. Refer to the diagnostic functional test Troubleshooting, "Inspecting Electrical Connectors" for details.
Perform a 45 N (10 lb) pull test on each of the wires in the ECM connector that are associated with the circuit.
Check the ECM connector (allen head screw) for the proper torque of 6.0 N m (55 lb in).
Check the customer connector (allen head screw) for the proper torque of 2.25 0.25 N m (20 2 lb in).
Check the harness and the wiring for abrasion and for pinch points.Expected Result:All connectors, pins, and sockets are completely coupled and/or inserted, and the harness and wiring are free of corrosion, of abrasion or of pinch points.Results:
OK - The connectors and wiring are okay.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 797, 797B
24H, 69D, 768C, 769C, 769D, 770, 771C, 771D, 772, 772B, 773B, 773D, 773F, 775B, 775D, 775F, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, 793C, 797, 797B, AD40,...
508, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 776C, 776D, 777, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 793F, 793F-XQ, 795F AC, 797, 7...
772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797...
776C, 785B, 785C, 789B, 793B, 793C, 797, 797B
776C, 785B, 785C, 789B, 793B, 793C, 797, 797B
550, 550B, 554, 560B, 564, 570, 570B, 574, 574B, 580, 580B, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, R1600, R1600G, R1600H, W330B, W345B II, W345C MH
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D L, 350, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385...
5130B, 5230B, S25
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, CR20, S25
834G, 834H, TK1051
350, 350 L, S25
1630818
SEAL
966G, 972G
966G, 972G
966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
345B L, 785, 789, 950G, 962G, 966H, 972H, 993K
992G, R1700 II, R1700G, R2900, R2900G
992G, R1700 II, R1700G, R2900, R2900G
5130B, 5230, 5230B, 992G, 992K, D11R, D11T
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 789D, 793D, 988G, AP-1055B, BG-2455C, CB-54, CB-64, CP-573E, CP-64, CP-663E, CP-74B, CP-76, CS-531, CS-531C, CS-533C, CS-563C, CS-573C, CS-573D, CS-583C...
988G, 988H, 988K, 993K, D11R, D11T, R1600G, R1600H
988G, 988H, 988K, 993K, D11R, D11T, R1600G, R1600H
3554073
SEAL-RECTANGULAR
834G, 834H, 836G, 836H, 988G, 988H, 993K, D8T, D9T
834G, 834H, 836G, 836H, 988G, 988H, 993K, D8T, D9T
797, 834G, 834H, 836G, 836H, 844K, 854K, 988G, 988H, 990K, 992K, 993K, D10T, D10T2, D8T, D9T
797, 797B, 797F, 834G, 834H, 836G, 836H, 854G, 988G, 988H