SEAL-O-RING 0336028 - Caterpillar

3606 (8RB),
3608 (6MC),
3612 (9RC, 9FR),
3616 (1PD, 1FN) EnginesSUPPLEMENT: AUGUST 1998Engine News SEBD9259, Article 15, Page 8, April 1998; "Procedure For Installing Resistive Temperature Detector (RTD)". Disregard this article. See Engine News SEBD9263, Article 11, Page 19 with the same title.
--------------- END SUPPLEMENT ---------------Use the following procedure when installing a 139-0521 Sensor (RTD) on these engines.
Illustration 1.1. Trim the outer jacket of the cable to a maximum limit of 75 2 mm (3.0 .1 in). See Dimension (X) in Illustration 1.2. Use 2L-8075 (red insulated crimp type ring) Terminals (DO NOT MODIFY). See (A) in Illustration 1.3. Insert cable (B) until the outer jacket contacts the terminal board. See (B) in Illustration 1.
Illustration 2.4. Cut the RTD wires to a maximum limit of 48 2 mm (1.9 .1 in). See Dimension (Y) in Illustration 2.5. Use 2L-8075 (red insulated crimp type ring) Terminals (DO NOT MODIFY). See (C) in Illustration 2.
Illustration 3.Black Wire (D).White Wire (E).Red Wire (F). 6. Attach red striped RTD wire with black wire (D). See Illustration 3. Apply teflon tape to threads (G).
Illustration 4.7. Add 5P-9210 Heat Sink Compound to the thermowell before inserting the RTD. See Illustration 4.