SEAL KIT 0399196 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02383202
Slide locking tab (1) into the unlocked position.
Disconnect harness assembly (2) from boost pressure sensor (3). Note: The boost pressure sensor has a three-wire plug.
Use a deep socket to remove boost pressure sensor (3) from the inlet manifold.
Remove O-ring seal (4) from the boost pressure sensor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02383202
Install a new O-ring seal (4) onto boost pressure sensor (3). Note: Do not lubricate the O-ring seal.
Use a deep socket to install boost pressure sensor (3) to the inlet manifold. Tighten the boost pressure sensor to a torque of 10 N m (89 lb in).
Connect harness assembly (2) to boost pressure sensor (3).
Slide locking tab (1) into the locked position.