0951618 SEAL-O-RING Caterpillar parts
Rating:
Alternative (cross code) number:
CA0951618
095-1618
0951618
CA0951618
095-1618
0951618
Weight: 0.02 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
5.7
mm
ID
57.6
mm
MATERIAL
Nitrile (NBR) Rubber 90 Duro
OD
0
mm
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$17.25
26 Jul 2022
0.37[0.17] Pounds
StockWise Auto
ITM Engine Components 09-51618 Intake Manifold Gasket
ITM Engine Components
ITM Engine Components
$27.12
15 Oct 2021
0.37[0.17] Pounds
US: Autoplicity ✅
ITM Engine Components 09-51618 Intake Manifold Gasket
ITM Engine Components Comes with full brand warranty || Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
ITM Engine Components Comes with full brand warranty || Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
For full view, you need register
Information:
Procedure for the 30-SI
Illustration 16 g00651391
Typical Example
Press collar (31) on rotor (28) .
Slide retainer (30) on rotor (28) .
Press bearing (29) on rotor (28) .
Press housing (22) on rotor (28) and bearing (29) .
Illustration 17 g00651367
Typical Example
Install 4 screws (27) in housing (22) .Note: Do not strike the bearing. Shocks from striking the housing can cause damage.
Install the inner race. Press the bearing into the housing.
Illustration 18 g00651235
Press cap (26) in housing (20). Install the coil and support (24) in housing (20). Guide the field leads through the hole as the coil is installed in the housing. Install 4 screws (25) .
Illustration 19 g00651365
Typical Example
Press stator (23) and housing (20) together. Guide the stator leads through the hole as the stator is installed in housing (20) .
Illustration 20 g00651362
Typical ExampleNote: Do not damage exposed stator windings or field windings. Bumping the windings or scraping the windings may break the insulation. Broken insulation may create a short circuit or a ground.Note: Some models have a fourth mounting lug.
Join housing (22) and housing (20). Install 4 bolts (21).
Illustration 21 g00651234
Install capacitor (34). Install screw (33) .
Illustration 22 g00651233
Install rectifier bridge (32). Install 2 screws (19) .
Illustration 23 g00651232
Slide terminal strap (17) in the housing. Install nut (16). Install screw (18).
Install diode trio (15). Install strap (12) .
Connect 3 leads (14). Install 3 nuts (13) .
Illustration 24 g00651228
Install terminal (11) .
Illustration 25 g00651227
Install regulator (10). Install screw (9) .
Illustration 26 g00651226
Install strap (7). Connect leads (5). Install nut (6). Install screw (8) .
Illustration 27 g00651225
Connect 2 leads (4). Install 2 insulated screws (3).
Illustration 28 g00651125
Position plate (2). Install 4 screws (1) .
Install the fan, the pulley, the washer, and the pulley nut.
Illustration 16 g00651391
Typical Example
Press collar (31) on rotor (28) .
Slide retainer (30) on rotor (28) .
Press bearing (29) on rotor (28) .
Press housing (22) on rotor (28) and bearing (29) .
Illustration 17 g00651367
Typical Example
Install 4 screws (27) in housing (22) .Note: Do not strike the bearing. Shocks from striking the housing can cause damage.
Install the inner race. Press the bearing into the housing.
Illustration 18 g00651235
Press cap (26) in housing (20). Install the coil and support (24) in housing (20). Guide the field leads through the hole as the coil is installed in the housing. Install 4 screws (25) .
Illustration 19 g00651365
Typical Example
Press stator (23) and housing (20) together. Guide the stator leads through the hole as the stator is installed in housing (20) .
Illustration 20 g00651362
Typical ExampleNote: Do not damage exposed stator windings or field windings. Bumping the windings or scraping the windings may break the insulation. Broken insulation may create a short circuit or a ground.Note: Some models have a fourth mounting lug.
Join housing (22) and housing (20). Install 4 bolts (21).
Illustration 21 g00651234
Install capacitor (34). Install screw (33) .
Illustration 22 g00651233
Install rectifier bridge (32). Install 2 screws (19) .
Illustration 23 g00651232
Slide terminal strap (17) in the housing. Install nut (16). Install screw (18).
Install diode trio (15). Install strap (12) .
Connect 3 leads (14). Install 3 nuts (13) .
Illustration 24 g00651228
Install terminal (11) .
Illustration 25 g00651227
Install regulator (10). Install screw (9) .
Illustration 26 g00651226
Install strap (7). Connect leads (5). Install nut (6). Install screw (8) .
Illustration 27 g00651225
Connect 2 leads (4). Install 2 insulated screws (3).
Illustration 28 g00651125
Position plate (2). Install 4 screws (1) .
Install the fan, the pulley, the washer, and the pulley nut.
Parts seal Caterpillar catalog:
0951617
SEAL-O-RING
Caterpillar
Caterpillar
0951615
SEAL-O-RING
Caterpillar
Caterpillar
0951614
SEAL-O-RING
Caterpillar
Caterpillar
0951605
SEAL-O-RING
Caterpillar
Caterpillar
0951570
SEAL-O-RING
Caterpillar
Caterpillar
0951569
SEAL-O-RING
Caterpillar
Caterpillar
0951642
SEAL-O-RING
Caterpillar
Caterpillar
0951641
SEAL-O-RING
Caterpillar
Caterpillar
0951640
SEAL-O-RING
Caterpillar
Caterpillar
0951637
SEAL-O-RING
Caterpillar
Caterpillar
0951629
SEAL-O-RING
Caterpillar
Caterpillar
0951620
SEAL-O-RING
Caterpillar
Caterpillar