0951717 SEAL-O-RING Caterpillar parts
301.5, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304.5, 304C CR, 304D CR, 304E, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 308E, 308E CR, 308E SR, 311, 311B, 311D LRR, 311F LRR, 312, 312...
Rating:
Alternative (cross code) number:
CA0951717
095-1717
0951717
CA0951717
095-1717
0951717
Weight: 0.01 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
3.1
mm
ID
114.4
mm
MATERIAL
Nitrile (NBR) Rubber 90 Duro
OD
0
mm
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$4.72
12 Jul 2022
0.1102[0.05] Pounds
US: TakePart
CTP Caterpillar Nbr (90) O-Ring (0951717) Aftermarket
CTP
CTP
$9.32
31 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR SEAL O RING 0951717 NEW
$8.89
07 Jul 2017
.11[0.00] pounds
CTP: CTP
Caterpillar NBR (90) O-Ring (0951717)
0951717 Caterpillar, O-Rings Weight(lbs): 0.10 Length(cm): 20.3200 Width(cm): 20.3200 Depth(cm): 2.5400
0951717 Caterpillar, O-Rings Weight(lbs): 0.10 Length(cm): 20.3200 Width(cm): 20.3200 Depth(cm): 2.5400
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 0951717:
EXCAVATOR
311
311B
311D LRR
311F LRR
312
312B
312B L
312D
312D L
312D2
312E
314D CR
314D LCR
314E CR
315
315B
315B FM L
315B L
315C
315D L
316E L
317
317B LN
318B
318C
318D L
318D2 L
318E L
319C
319D
319D L
319D LN
320
320 L
320B
320B L
320C
320C FM
320C L
320D
320D FM
320D FM RR
320D GC
320D L
320D LN
320D LRR
320D RR
320D2
320D2 GC
320D2 L
320E
320E L
320E LN
320E LRR
320E RR
320N
321C
321D LCR
322B L
322C
323D L
323D LN
323D SA
323D2 L
323E L
324D
324D L
325
325 LN
325B L
325C
325C L
325D
325D L
330B L
330C
330D L
336D L
345B II
345B L
345C L
E110
E120
E140
E200B
E300B
E70
M325D L MH
M325D MH
MINI HYD EXCAVATOR
301.5
303
303.5C
303.5D
303.5E
303C CR
303E CR
304.5
304C CR
304D CR
304E
305.5
305.5D
305.5E
305C CR
305D CR
305E
306
308E
308E CR
308E SR
WHEEL TRACTOR-SCRAPER
613G
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Illustration 1 g01137560
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve springs (3). Remove retainer locks (1).
Remove Tooling (A). Remove spring retainer (2) and valve springs (3).
Remove valve stem seal (4), spring seat washer (5), and valves (6). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137560
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Lubricate valves (6) with clean engine oil. Install valves (6) in the cylinder head assembly. Install new valve stem seal (4) against the valve guide.
Install spring seat washer (5), valve springs (3), and spring retainer (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Note: A small amount of grease can be used to hold the valve keepers in position during installation.
Use Tooling (A) to compress valve springs (3). Install retainer locks (1). End By:
Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Illustration 1 g01137560
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve springs (3). Remove retainer locks (1).
Remove Tooling (A). Remove spring retainer (2) and valve springs (3).
Remove valve stem seal (4), spring seat washer (5), and valves (6). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137560
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Lubricate valves (6) with clean engine oil. Install valves (6) in the cylinder head assembly. Install new valve stem seal (4) against the valve guide.
Install spring seat washer (5), valve springs (3), and spring retainer (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Note: A small amount of grease can be used to hold the valve keepers in position during installation.
Use Tooling (A) to compress valve springs (3). Install retainer locks (1). End By:
Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
330, 330 L, 345B, 345B II, 345B L, 350, OEMS
330C, 330C FM, 330C L, 330C MH
328D LCR, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C MH, 345D L, 349D L, 349E, 349E ...
330C, 330D L, 330D MH, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L
330C, 330D L, 330D MH, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374D L, 374F L
345B II, 345C, 345C L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L
325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
328D LCR, 345B II, 345B L, 345C, 345C L, 345D L, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, E650
345B II, 345B L, 350, 365B, 365B II, 365B L
330, 330 FM L, 330 L, 330B, 330B L, E120B, W330B
330B, 330B L, 345B, 345B L, W330B
345B II, 345C, E120, E140, E180, E240, E240C, E300, E300B, E450, EL240B
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2,...
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304C CR, 304D CR, 304E, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306,...
301.5, 303, 303.5, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 320B L, 320C, 320E L, 321B, 321C, 321D LCR, E110, E120, E140,...
0996532
SEAL-O-RING
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B, 3...
311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B, 3...
303E CR, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2,...
2384C, 2484C, 301.5, 302.7D, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307B, 307C, 308C, 311, 311B, 31...
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 303, 303.5, 303.5C, 304, 304.5, 305, 305.5, 305.5E, 306, 306E, 307, 307B, 307D, 308D, 311, 311D LRR, 312, 314D CR, 314D LCR,...
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 311, 31...
0994780
SEAL-O-RING
305.5, 306, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 312, 312B, 313B, E120B
305.5, 306, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 312, 312B, 313B, E120B
303, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B, 315B FM L, 315B L, 315C, 315D...
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN
303.5, 303.5C, 303.5D, 303.5E, 303C CR, 304C CR, 304D CR, 304E, 305D CR, 305E, 307, 307B, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 311C, 312, 312B, 312B L, 312C, 314C, 315, 315B, 315B FM L, 315B L...