SEAL,OIL 0957025 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     FT-1114     Vacuum Cap     1    
5P-0306 Vacuum Transducer     1    
6V-4142 Fitting     1    
5K-5068 Fitting     1    
B     138-7573     Link Bracket     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01110918
Install Tooling (B) and a suitable lifting device to dual tilt control valve (7) and position dual tilt control valve (7). The weight of dual tilt control valve (7) is approximately 41 kg (90 lb). Install nut (8), bolts (9), and bolts (10) .
Illustration 2 g01110915
Connect harness assembly (6) .
Illustration 3 g01110911
Connect tube assemblies (4) and hose assemblies (5) .
Illustration 4 g01110909
Close doors (1) and install bolts (2) .
Connect hose assemblies (3) .
Illustration 5 g01105562
Remove Tooling (A) and install the hydraulic tank cap.