SEAL 0960883 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 238-9586 Engine Turning Tool 1
C 1U-9200 Lever Puller Hoist 1
D 189-0411 Shackle As 2
E 6V-6146 Load Leveling Beam 1 Start By:
Remove the cooling package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove".
Illustration 1 g01291159
Disconnect hose assembly (1). Disconnect cable assembly (2). Disconnect harness assemblies (3). Disconnect cable assembly (4). Disconnect harness assemblies (5).
Illustration 2 g01291160
Disconnect harness assembly (6).
Illustration 3 g01291161
Disconnect hose assemblies (7), (8), and (9).
Illustration 4 g01291162
Disconnect clamp (10).
Illustration 5 g01291179
Remove bolts (11). Remove bolts (12). Repeat for the opposite side. Disconnect tube assembly (13). Repeat for the opposite side.
Illustration 6 g01291183
Attach Tooling (A) and a suitable lifting device onto exhaust elbow (14). The weight of exhaust elbow (14) is approximately 34 kg (75 lb). Remove exhaust elbow (14).
Illustration 7 g01291186
Disconnect clamp (15).
Illustration 8 g01291225
Remove bolts (16). Remove guard (17).
Illustration 9 g01291227
Remove bolts (18). Remove guard (19).
Illustration 10 g01291228
Disconnect hose (20).
Illustration 11 g01291232
Illustration 12 g01291243
Install Tooling (B). Use Tooling (B) in order to rotate the engine. Rotate the engine in order to gain access to bolts (22). Remove bolts (22). Remove bolts (21).
Illustration 13 g01376223
Use Tooling (C) in order to support generator rotor (23).
Illustration 14 g01291246
Attach Tooling (D) onto engine (24). Attach Tooling (E) and a suitable lifting device onto Tooling (D). The weight of engine (24) is approximately 3527 kg (7775 lb).
Illustration 15 g01291247
Remove mounting bolts (25). Remove engine (24) from the generator.