SEAL KIT 0961481 - Caterpillar

Illustration 1 g00681475
(A) Vent for upper body
(B) Floor vent
(C) Defroster vent
(D) Defroster vent
(E) Vent for upper body
(F) Control panel Redirect the louvers for air outlet (A) and (E) by hand to the desired direction. The louvers for air outlets (B), (C), and (D) cannot be redirected.The climate control panel is located under the right window inside the cab:
Illustration 2 g00731176
Climate Control Panel with Air Conditioning
Illustration 3 g00731179
Climate Control Panel with Heater Only
(1) On/Off switch
(2) Automatic control switch
(3) Temperature switch
(4) LCD panel
(5) Fan switch
(6) Compressor switch
(7) Defrost mode
(8) Fresh air
(9) Recirculated air
(10) Air inlet selection switch
(11) Air outlet selection switch
Automatic Control Switch (2) - In order to enter the full "AUT" mode for automatic climate control, push this switch. However, if you push the switch again, you cannot turn off the air conditioning. When the system is in full "AUT" mode, you can manually change specific functions by pushing another switch. If you manually change a specific function, "AUT" does not appear in the display, but the unchanged functions will remain in "AUT" mode. Even on a sunny day, a heat only climate control system can cool the cab in full "AUT" mode if the ambient temperature is no more than 20 °C (68 °F).The climate control unit provides excellent operator comfort in the full "AUT" setting. Press the "AUT" switch for full "AUT" mode. Push temperature switch (3) in order to set the desired temperature. The temperature is only shown in metric values. All other functions of climate control will be handled automatically.
Illustration 4 g00681563
Sunlight Sensor
In order to take advantage of the full "AUT" setting of the climate control system, always keep the sunlight sensor clean. Do not obstruct the sunlight sensor. If the climate control system is in the full "AUT" setting at engine start-up and the temperature inside the cab is too warm or too cool, the damper for fresh air ventilation may automatically close for a few minutes. This will help to bring the air temperature to the preset temperature more quickly.
Temperature Switch (3) - These switches control the temperature of the air that is coming from the air outlets in order to achieve the temperature setpoint. When the system is in full "AUT" mode, you can select a temperature from 18 to 32 °C (64.4 to 89.6 °F). The preset temperature appears on display (4). If the climate control system is in the automatic mode, push these switches in order to change the preset temperature. Use the up key and the down key in order to adjust the temperature.
Fan Switch (5) - The fan switch directly controls the fan speed. If the climate control system is operating in the automatic mode, pushing this switch overrides the automatically selected fan speed. Use the up key and the down key in order to adjust the fan speed.English Versus Metric ToggleIn order to convert the temperature reading from Degrees Celsius to Degrees Fahrenheit, depress both of the fan speed keys at the same time for five seconds. The same action is