0962664 SEAL-U-CUP Caterpillar parts
320 L, 320B, 320C, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D FM, 324D FM LL, 325 LN, 325B L, 325C, 330C L, E240, E240C, E300, E450, EL240B, M325B
Rating:
Alternative (cross code) number:
CA0962664
096-2664
0962664
CA0962664
096-2664
0962664
Weight: 0.05 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 0962664:
Number on catalog scheme:
15
For full view, you need register
Information:
Installation Procedure
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Ensure that the wiring harness assembly is correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness convoluting.
Illustration 1 g02937680
Illustration 2 g02937736
If necessary, install studs (9) into front cover (10) . Tighten the studs to a torque of 18 N m (159 lb in)
Install new O-ring seal (11) onto fuel injection pump (6) .
Carefully install fuel injection pump (6) into front housing (10) . Ensure that the bore in front housing (10) is not damaged as the fuel injection pump is installed.
Install nuts (8) onto studs (9) . Tighten the nuts to a torque of 25 N m (221 lb in).
Illustration 3 g02709437
Remove the appropriate caps in order to install a new fuel injection line (7) . Install new fuel injection line (7) to the fuel injection pump and to the fuel manifold. Refer to Disassembly and Assembly, "Fuel Injection Lines - Install" for the correct procedure.
Remove the appropriate plugs and caps and connect plastic tube assembly (2) , plastic tube assembly (3) , plastic tube assembly (4) plastic tube assembly (5) to fuel injection pump (6) .
Connect harness assembly (1) to the solenoid on fuel injection pump (6) .
Install the fuel injection pump gear. Refer to Disassembly and Assembly, "Fuel Injection Pump Gear - Install" for the correct procedure.
Replace the filters for primary fuel system. Refer to Operation and Maintenance Manual, "Fuel System Primary (Water Separator) Element - Replace" for the correct procedure.
Replace the filters for secondary fuel system. Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace" for the correct procedure.
Turn the fuel supply to the ON position.
Turn the battery disconnect switch to the ON position.
Remove the air from the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime" for the correct procedure.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Ensure that the wiring harness assembly is correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness convoluting.
Illustration 1 g02937680
Illustration 2 g02937736
If necessary, install studs (9) into front cover (10) . Tighten the studs to a torque of 18 N m (159 lb in)
Install new O-ring seal (11) onto fuel injection pump (6) .
Carefully install fuel injection pump (6) into front housing (10) . Ensure that the bore in front housing (10) is not damaged as the fuel injection pump is installed.
Install nuts (8) onto studs (9) . Tighten the nuts to a torque of 25 N m (221 lb in).
Illustration 3 g02709437
Remove the appropriate caps in order to install a new fuel injection line (7) . Install new fuel injection line (7) to the fuel injection pump and to the fuel manifold. Refer to Disassembly and Assembly, "Fuel Injection Lines - Install" for the correct procedure.
Remove the appropriate plugs and caps and connect plastic tube assembly (2) , plastic tube assembly (3) , plastic tube assembly (4) plastic tube assembly (5) to fuel injection pump (6) .
Connect harness assembly (1) to the solenoid on fuel injection pump (6) .
Install the fuel injection pump gear. Refer to Disassembly and Assembly, "Fuel Injection Pump Gear - Install" for the correct procedure.
Replace the filters for primary fuel system. Refer to Operation and Maintenance Manual, "Fuel System Primary (Water Separator) Element - Replace" for the correct procedure.
Replace the filters for secondary fuel system. Refer to Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace" for the correct procedure.
Turn the fuel supply to the ON position.
Turn the battery disconnect switch to the ON position.
Remove the air from the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime" for the correct procedure.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
320 L, 320N, 322, 322 FM L, 322 LN, E110, E180, E200B, E240, E240C, E300B, EL240B, OEMS
322 FM L, 330
325B, 325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
325B, 325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
325B L, 330, 330 FM L, 330 L, 330B L, 350, 350 L, CR20, P16
325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 325D L, 329D, 329D L
345B II, 345C, E120, E140, E180, E240, E240C, E300, E300B, E450, EL240B
E180, E200B, E240, EL240B
2279947
SEAL
322C, 322C FM, 325C, 325C FM, M325C MH
322C, 322C FM, 325C, 325C FM, M325C MH
2279946
SEAL
322C, 322C FM, 325C, 325C FM, M325C MH
322C, 322C FM, 325C, 325C FM, M325C MH
2069212
SEAL GP-DUO-CONE
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320C, 322B LN, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E LN, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 32...
1090, 1190, 1190T, 1390, 2290, 2390, 2391, 320C, 322B LN, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E LN, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 32...
2276072
SEAL-DUST
322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
1930382
SEAL GP-DUO-CONE
1090, 1190T, 2290, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325C L, 325D FM, 325D FM LL, 511, OEMS, TK711
1090, 1190T, 2290, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325C L, 325D FM, 325D FM LL, 511, OEMS, TK711
2354248
SEAL
322C, 322C FM, 325C, 325C FM
322C, 322C FM, 325C, 325C FM
2250332
SEAL
322C, 322C FM, 324D L, 325C, 325C FM, 325D L, 325D MH, 329D L, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D MH, 336D L, 345C, 345C L, 345C MH, 345D L, 349D L, W345C MH
322C, 322C FM, 324D L, 325C, 325C FM, 325D L, 325D MH, 329D L, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D MH, 336D L, 345C, 345C L, 345C MH, 345D L, 349D L, W345C MH
2681901
SEAL
322C, 322C FM, 324D L, 325C, 325C FM, 325D L, 325D MH, 329D L, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D MH, 336D L, 345C, 345C L, 345C MH, 345D L, 349D L, W345C MH
322C, 322C FM, 324D L, 325C, 325C FM, 325D L, 325D MH, 329D L, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D MH, 336D L, 345C, 345C L, 345C MH, 345D L, 349D L, W345C MH
2044643
SEAL
320C FM, 322C, 322C FM, 325C FM, 330C FM, 533, 543
320C FM, 322C, 322C FM, 325C FM, 330C FM, 533, 543
2044642
SEAL
320C FM, 322C, 322C FM, 325C FM, 330C FM
320C FM, 322C, 322C FM, 325C FM, 330C FM
2572890
SEAL
322C, 322C FM, 325C FM, 330C FM, 345C
322C, 322C FM, 325C FM, 330C FM, 345C
2042798
SEAL
322C, 322C FM, 325C, 325C FM, M325C MH
322C, 322C FM, 325C, 325C FM, M325C MH