0965382 SEAL-O-RING Caterpillar parts
323D L, 323D LN, 324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D FM, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330D L
Rating:
Alternative (cross code) number:
CA0965382
096-5382
0965382
CA0965382
096-5382
0965382
Weight: 0.03 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
5.7
mm
ID
124.6
mm
MATERIAL
Nitrile (NBR) Rubber 90 Duro
OD
0
mm
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$19.94
09 Mar 2019
REPLACEMENT CATERPILLAR: REPLACEMENT CAT
CATERPILLAR 0965382 SEAL-O-RING NEW
$9.63
31 Oct 2021
0.1102[0.05] Pounds
US: IronDT
CTP Caterpillar Nbr (90) O-Ring (0965382) Aftermarket
CTP
CTP
Number on catalog scheme:
14
For full view, you need register
Compatible equipment models: 0965382:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the assembly of the camshaft is clean and free from damage.
Lubricate the bearings of the camshaft with clean engine oil.
Illustration 1 g01311416
Typical example
Illustration 2 g01311407
Typical example
Carefully install camshaft assembly (8) into the cylinder block. Ensure that timing marks (X) are aligned on the following gears:
Crankshaft gear (7)
Camshaft gear (4)
Idler gear (6)Note: Do not damage the lobes of the camshaft or the camshaft bearings.
Illustration 3 g01311411
Typical example
Note: C0.5, C0.7, C1.1, and C1.6 engines have a different camshaft retainer and different fasteners to C1.5 and C2.2 engines. The installation procedure is similar for all models.
Place camshaft retainer (5) in position. Align the holes in the retainer with the holes in the cylinder block.
Rotate camshaft gear (4) in order to align the access hole in the camshaft gear with the hole for fastener (2). For C0.5, C0.7, C1.1, and C1.6 engines, install allen head screw (2) and bolt (1). Tighten fasteners (1) and (2) to a torque of 10 N m (89 lb in).For C1.5 and C2.2 engines, install bolt (2) and tighten to a torque of 10 N m (89 lb in). Rotate camshaft gear (4) in order to align the access hole in the camshaft gear with the hole for bolt (1). Install bolt (1) and tighten to a torque of 10 N m (89 lb in).
Install slider (3) to camshaft gear (4).
If the engine is equipped with a mechanical fuel transfer pump, install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove and Install". End By:
Install the lifters. Refer to Disassembly and Assembly, "Lifter Group- Remove and Install".
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the assembly of the camshaft is clean and free from damage.
Lubricate the bearings of the camshaft with clean engine oil.
Illustration 1 g01311416
Typical example
Illustration 2 g01311407
Typical example
Carefully install camshaft assembly (8) into the cylinder block. Ensure that timing marks (X) are aligned on the following gears:
Crankshaft gear (7)
Camshaft gear (4)
Idler gear (6)Note: Do not damage the lobes of the camshaft or the camshaft bearings.
Illustration 3 g01311411
Typical example
Note: C0.5, C0.7, C1.1, and C1.6 engines have a different camshaft retainer and different fasteners to C1.5 and C2.2 engines. The installation procedure is similar for all models.
Place camshaft retainer (5) in position. Align the holes in the retainer with the holes in the cylinder block.
Rotate camshaft gear (4) in order to align the access hole in the camshaft gear with the hole for fastener (2). For C0.5, C0.7, C1.1, and C1.6 engines, install allen head screw (2) and bolt (1). Tighten fasteners (1) and (2) to a torque of 10 N m (89 lb in).For C1.5 and C2.2 engines, install bolt (2) and tighten to a torque of 10 N m (89 lb in). Rotate camshaft gear (4) in order to align the access hole in the camshaft gear with the hole for bolt (1). Install bolt (1) and tighten to a torque of 10 N m (89 lb in).
Install slider (3) to camshaft gear (4).
If the engine is equipped with a mechanical fuel transfer pump, install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove and Install". End By:
Install the lifters. Refer to Disassembly and Assembly, "Lifter Group- Remove and Install".
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 345C, 345C L, 345C MH, 385C L, W345C MH
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E...
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E...
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L,...
325B, 325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
325B, 325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
328D LCR, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C MH, 345D L, 349D L, 349E, 349E ...
330C, 330D L, 330D MH, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L
330C, 330D L, 330D MH, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374D L, 374F L
325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
323D L, 323D LN, 324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D FM, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330D L
2813568
SEAL
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
2653643
SEAL
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA
2653633
SEAL
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
2653631
SEAL
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
3605432
SEAL-AIR
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 328D LCR, 329D, 329D L
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 328D LCR, 329D, 329D L
3571946
SEAL-AIR
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 328D LCR, 329D, 329D L
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 328D LCR, 329D, 329D L
3615193
SEAL-AIR
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L
2302884
SEAL
324D, 324D LN, 325D, 325D L, M325D L MH, M325D MH
324D, 324D LN, 325D, 325D L, M325D L MH, M325D MH
2302880
SEAL
324D, 324D LN, 325D, 325D L, M325D L MH, M325D MH
324D, 324D LN, 325D, 325D L, M325D L MH, M325D MH
2717764
SEAL
323D L, 323D LN, 324D, 324D LN, 325D, 325D L, 330D, 330D L, 330D LN, 345C, 345C L, 365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, M325D L MH, M325D MH, M330D
323D L, 323D LN, 324D, 324D LN, 325D, 325D L, 330D, 330D L, 330D LN, 345C, 345C L, 365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, M325D L MH, M325D MH, M330D