SEAL-LIP TYPE 0965536 - Caterpillar

Illustration 1 g03262477
Top view
Bolt tightening sequence
Table 1
Specification for 235-3414 Cylinder Head Gpand 443-0671 Cylinder Head Gp
Item Qty Part Specification Description
1 8 131-0420 Cylinder Head Fastener Gp Use the following procedure in order to tighten the cylinder head bolts. Refer to Illustration 1 for the tightening sequence:
1. Tighten bolt 1 through bolt 8 in the numerical sequence to 30 5 N m (22 4 lb ft).
2. Tighten bolt 1 through bolt 8 in the numerical sequence to 270 35 N m (200 26 lb ft).
3. Tighten bolt 1 through bolt 8 in the numerical sequence to 450 20 N m (332 15 lb ft).
Tighten two bolts (2) after you tighten cylinder heads bolts (1) to final torque.
4. Tighten bolt (9) and bolt (10) to 55 10 N m (41 7 lb ft).
2 2 0S-1590 Bolt
Illustration 2 g03259663
Table 2
Item Qty Part Specification Description
3 1 219-7000 O-Ring Seal Before assembly, coat the bore in the head and the O-ring seal with liquid soap.
4 1 348-2213 Adapter Before assembly, apply Loctite C5A Copper Anti-Seize to the threads.
Torque to 180 10 N m (133 7 lb ft).
B - - Height of the new cylinder head is 142.00 0.15 mm (5.591 0.006 inch).
5 3 3B-0645 Cup Plug Before assembly, apply high strength or high temperature anaerobic flange sealant to the bore.
Installation depth (D) is 1.5 0.5 mm (0.06 0.02 inch).
6 5 3B-0623 Cup Plug Before assembly, apply high strength or high temperature anaerobic flange sealant to the bore.
Installation depth (E) is 1.0 0.5 mm (0.04 0.02 inch).
Illustration 3 g03259664
Bottom view
Table 3
Item Qty Part Specification Description
7 3 6V-7604 Cup Plug Installation depth (J) is 25.5 0.5 mm (1.00 0.02 inch).
8 1 208-8776 Cup Plug Installation depth (K) is 1.5 0.5 mm (0.06 0.02 inch).
9 1 6V-7604 Cup Plug Installation depth (L) is 1.5 0.5 mm (0.06 0.02 inch).