0966826 SEAL-OIL Caterpillar parts
307, 307B, 307C, 308C, E70, E70B
Rating:
Alternative (cross code) number:
CA0966826
096-6826
0966826
CA0966826
096-6826
0966826
Weight: 0.11 pounds 0 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Number on catalog scheme:
27
For full view, you need register
Compatible equipment models: 0966826:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M14 x1.5 by 100 mm 1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D - Guide Stud
M12 x1.75 by 50 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.e in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M14 x1.5 by 100 mm 1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D - Guide Stud
M12 x1.75 by 50 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02368018
Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from damage.
Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
If necessary, follow Step 3.a through Step 3.e in order to install vibration damper, crankshaft pulley to crankshaft adapter.
Place crankshaft adapter (4) onto a suitable support.
Install Tooling (D) crankshaft adapter (4) .
Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
Install bolts (7) to the crankshaft pulley assembly.Note: Evenly space bolts (7) around the crankshaft pulley assembly.
Tighten bolts (7) to a torque of 115 N m (85 lb ft).
If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install friction shim (3) .
Install friction shim (3) .
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
Install crankshaft pulley assembly (2) onto the crankshaft.
Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
Remove Tooling (A) .
Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1) to a torque of 40 N m (29 lb ft).
Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
303.5C, 303.5D, 303.5E, 303C CR, 304C CR, 304D CR, 304E, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307C, 307D, 307E, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311D LRR, 311F LRR, 312D, 312D L,...
307C, 320C, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325C L, 325D, 325D FM, 325D L, 326D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN,...
307, 307B, 307C, 311C, 320C, 854G, 924G, 924GZ, 924H, 924HZ, 928G, 928HZ, 930G, 938G II, 938H, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, D3G, D4G, D5G, D6N, D7R II, IT28G, IT38G II, ...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN, E110, E110B, E120B, E200B, E70
303.5E, 303E CR, 304E, 305, 305.5E, 305E, 307D, 308D, 308E CR, 308E SR, 320C, 330C L, 330D L, 345B II, 345C, E200B, E240, E240C, E300, E300B, E650, E70B, EL240B, H110E S
115, 312D2, 350, 350 L, 365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B, 901C, 902C, 903C, CR20, E70, H140CS, P16, S25
303E CR, 307, 325C, 330, 330 FM L, 330 L, 330C, 330C L, 345C, E110B, E120B, E180, E200B, E240, E240C, E300, E300B, E70B, EL240B
305.5E, 320 L, E120B, E180, E200B, E240, E240C, E70, E70B, EL240B
115, 307, 320 L, 330 L, 63, H110E S, H140CS, H140DS
115, 307, 320 L, 330 L, 63, H140CS
115, 307, 320 L, 330 L, 63, H140CS, H140DS
303, 303.5, 304.5, 307, 307B, 307D, E110, E120, E140, E300, E70, E70B
307, 307B, E70, E70B
307, 307B, 307C, 308C, 320C, 320D L, 320D LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325, 325 L, 325 LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L,...
7I2329
SEAL
307, 307B, E70B
307, 307B, E70B
0966789
SEAL
307, 307B, 307C, 308C, E70, E70B
307, 307B, 307C, 308C, E70, E70B
184, 229D, 231D, 245, 245B, 24M, 320C, 320D FM, 515, 518C, 525, 528B, 530B, 543, 551, 552, 552 2, 613C, 613C II, 613G, 621, 621B, 621E, 621F, 621G, 621H, 621K, 623E, 623F, 623G, 623H, 623K, 623K LRC, ...
1716767
SEAL-TRACK
307, 307B
307, 307B
307, 307B
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2484C, 2491, 2590, 304C CR, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307, 307B, 307C, 307D, 307E, 308C, 311, 311B, 311C, 312, 312B, 313B, 315, 315B, 31...
1028131
SEAL-RING
307, 307B, PM-465
307, 307B, PM-465
307, 307B, 307C, 307D, 307E, 308C, E70, PM-465
4I9280
SEAL
307, 307B, 307C, 307D, 307E, 308E, E70B
307, 307B, 307C, 307D, 307E, 308E, E70B