SEAL-O-RING 0968289 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2321 Puller Group 1
B 1P-1861 Retaining Ring Pliers 1
C 1P-1859 Retaining Ring Pliers 1
D 1P-1855 Retaining Ring Pliers 1
E 8H-0663 Bearing Puller Gp 1
F 8S-6470 Forcing Screw 1 Start By:
Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01028588
Use Tooling (A) to remove drive gear (1).
Use Tooling (C) to remove retaining ring (2).
Remove spacer (3).
Remove cover (20).
Use Tooling (F) to remove impeller (19).
Remove cam liner (18).
Use Tooling (B) to remove retaining ring (16).
Remove plate (17).
Separate housing (4) from housing (15).
Use a suitable press to remove shaft assembly (10) from housing (4).
Use a suitable press and Tooling (E) to remove bearing (6).
Use Tooling (D) to remove retaining ring (7).
Use a suitable press and Tooling (E) to remove bearing (9) and spacer (8) from shaft assembly (10).
Remove washer (14) from shaft assembly (10).
Remove seal (13) and seal (12) from shaft assembly (10).
Remove washer (11) from shaft assembly (10).
Remove seal (5) from housing (4).