1075558 SEAL-OIL Caterpillar parts
3412, 3412D
Rating:
Alternative (cross code) number:
CA1075558
107-5558
1075558
CA1075558
107-5558
1075558
Weight: 0.010 pounds 0 kg.
MARINE ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Parts Number 1075558 Brake Pads Pack of 1 Piece
CAIJUN-AUTO PARTS NUMBER: 1075558 || You can send VIN to us if you are not sure about your OEM number || If you have any questions, please be free to contact us at any time || Durable materials with high performance || Enjoy your shopping from CAIJUN-AUTO
CAIJUN-AUTO PARTS NUMBER: 1075558 || You can send VIN to us if you are not sure about your OEM number || If you have any questions, please be free to contact us at any time || Durable materials with high performance || Enjoy your shopping from CAIJUN-AUTO
JUNMO-AUTO 1PCS Brake Pads OEM 1075558
JUNMO-AUTO The product you purchased are brand new made in China. If you cannot confirm whether the product you purchased are correct, please provide your chassis number for inquiry（VIN）, or provide the part number of your old parts for comparison. || As the accessories you purchased have a professional nature, we recommend that you go to a professional repair center for installation. || This product comes with a one-year warranty, and JUNMO-AUTO provides you with high-quality service. || When purchasing, please confirm if the part number on your old part matches ours:OEM 1075558 || Your package includes:1 PCS brake pads
JUNMO-AUTO The product you purchased are brand new made in China. If you cannot confirm whether the product you purchased are correct, please provide your chassis number for inquiry（VIN）, or provide the part number of your old parts for comparison. || As the accessories you purchased have a professional nature, we recommend that you go to a professional repair center for installation. || This product comes with a one-year warranty, and JUNMO-AUTO provides you with high-quality service. || When purchasing, please confirm if the part number on your old part matches ours:OEM 1075558 || Your package includes:1 PCS brake pads
AUTO-OTUA Brake Pads 1075558
AUTO-OTUA AUTO-OTUA FULL EFFORT TO PROVIDE OUR CLIENTS WITH SELECTED AUTO PARTS. || AUTO-OTUA To avoid purchasing the wrong parts, please send us your vehicle identification number (VIN) before purchasing, and our engineers will assist you in confirming that the correct parts have been shipped. || AUTO-OTUA is an automotive parts alliance that brings together multiple qualified OEM auto parts manufacturers providing variety of wide range auto parts in order to help our clients to repair their cars. if you need any auto parts which you could not find , please be free to contact us ,we will try to help you. || AUTO-OTUA PLEASE DOUBLE CONFIRM YOUR 0RIG-PART NO. should be same as in the link: 1075558 || AUTO-OTUA You will receive a package with : 1 pc of brake pads
AUTO-OTUA AUTO-OTUA FULL EFFORT TO PROVIDE OUR CLIENTS WITH SELECTED AUTO PARTS. || AUTO-OTUA To avoid purchasing the wrong parts, please send us your vehicle identification number (VIN) before purchasing, and our engineers will assist you in confirming that the correct parts have been shipped. || AUTO-OTUA is an automotive parts alliance that brings together multiple qualified OEM auto parts manufacturers providing variety of wide range auto parts in order to help our clients to repair their cars. if you need any auto parts which you could not find , please be free to contact us ,we will try to help you. || AUTO-OTUA PLEASE DOUBLE CONFIRM YOUR 0RIG-PART NO. should be same as in the link: 1075558 || AUTO-OTUA You will receive a package with : 1 pc of brake pads
Number on catalog scheme:
11
For full view, you need register
Information:
Test Preparation
Reference: For more information about preparing the machine for troubleshooting, refer to the Service Manual module Testing and Adjusting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.Reference: Refer to the Service Manual module Testing and Adjusting, "System Pressure - Release".
Park the machine on a smooth, level surface. Move the machine away from other operating machines and away from personnel.
Permit only one operator on the machine. Keep all other personnel away from the machine or in sight of the operator.
Position the work tool on the ground.
Engage the parking brake.
Illustration 2 g03137299
Place the steering frame lock in the LOCKED position.
Release the hydraulic pressure. Test Procedure
Illustration 3 g02198436
Location of hydraulic service center
Illustration 4 g03581821
Location of steering pilot supply pressure tap in the bottom of the hydraulic service center (A) (Right side view)
(1) Primary steering pilot supply pressure tap
Illustration 5 g03581824
Location of implement/redundant steering pilot supply pressure tap is on the front differential lock valve. The front differential lock is located on the left side of the front frame.
(1a) Implement/redundant steering pilot supply pressure tap
Illustration 6 g03137301
Ensure that the engine start switch is in the OFF position. Install a 8T-0850 Pressure Gauge from 1U-5481 Pressure Gauge Group or a 198-4240 Digital Pressure Indicator to pressure tap (1).
Ensure that the engine start switch is in the OFF position. Install a 8T-0850 Pressure Gauge from 1U-5481 Pressure Gauge Group or a 198-4240 Digital Pressure Indicator to pressure tap (1a).
Start the engine and warm the hydraulic oil to a normal operating temperature of approximately 54 to 70°C (129 to 158°F).
Run the engine at low idle and the fan control at minimum fan speed.
Observe the pressure gauge from both gages.
The pressure reading should be at least 3650 350 kPa (530 50 psi).
If the pressure is correct, turn the engine start switch to the OFF position.
Release the hydraulic pressure. Refer to the Service Manual module Testing and Adjusting, "System Pressure - Release".
Remove the test equipment from the machine.
If the pilot oil pressure is not correct, turn the engine start switch to the OFF position. In order to adjust the pressure reducing valve, refer to the instructions below on adjusting the pressure reducing valve.Adjusting the Pressure Reducing Valve for the Steering Pilot Supply.
Illustration 7 g03137744
Control manifold located in hydraulic service center. Side removed for clarity.
(2) Pressure reducing valve for the primary steering pilot supply
Locate the pressure reducing valve for the primary steering pilot supply. The pressure reducing valve is located on the control manifold in the hydraulic service center.
Before adjusting the pressure reducing valve (2), release the hydraulic system pressure. Refer to Testing and Adjusting, "System Pressure - Release".
Ensure that the work tool is on the ground. Turn the engine start switch to the OFF position. Note: Always, turn adjustment screw clockwise in order to adjust the pressure. Turning clockwise will compensate for any internal friction inside the valve that would oppose the setting of the bias spring. For example, if the adjustment screw needs a 1/2 turn counterclockwise to decrease the
Reference: For more information about preparing the machine for troubleshooting, refer to the Service Manual module Testing and Adjusting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.Reference: Refer to the Service Manual module Testing and Adjusting, "System Pressure - Release".
Park the machine on a smooth, level surface. Move the machine away from other operating machines and away from personnel.
Permit only one operator on the machine. Keep all other personnel away from the machine or in sight of the operator.
Position the work tool on the ground.
Engage the parking brake.
Illustration 2 g03137299
Place the steering frame lock in the LOCKED position.
Release the hydraulic pressure. Test Procedure
Illustration 3 g02198436
Location of hydraulic service center
Illustration 4 g03581821
Location of steering pilot supply pressure tap in the bottom of the hydraulic service center (A) (Right side view)
(1) Primary steering pilot supply pressure tap
Illustration 5 g03581824
Location of implement/redundant steering pilot supply pressure tap is on the front differential lock valve. The front differential lock is located on the left side of the front frame.
(1a) Implement/redundant steering pilot supply pressure tap
Illustration 6 g03137301
Ensure that the engine start switch is in the OFF position. Install a 8T-0850 Pressure Gauge from 1U-5481 Pressure Gauge Group or a 198-4240 Digital Pressure Indicator to pressure tap (1).
Ensure that the engine start switch is in the OFF position. Install a 8T-0850 Pressure Gauge from 1U-5481 Pressure Gauge Group or a 198-4240 Digital Pressure Indicator to pressure tap (1a).
Start the engine and warm the hydraulic oil to a normal operating temperature of approximately 54 to 70°C (129 to 158°F).
Run the engine at low idle and the fan control at minimum fan speed.
Observe the pressure gauge from both gages.
The pressure reading should be at least 3650 350 kPa (530 50 psi).
If the pressure is correct, turn the engine start switch to the OFF position.
Release the hydraulic pressure. Refer to the Service Manual module Testing and Adjusting, "System Pressure - Release".
Remove the test equipment from the machine.
If the pilot oil pressure is not correct, turn the engine start switch to the OFF position. In order to adjust the pressure reducing valve, refer to the instructions below on adjusting the pressure reducing valve.Adjusting the Pressure Reducing Valve for the Steering Pilot Supply.
Illustration 7 g03137744
Control manifold located in hydraulic service center. Side removed for clarity.
(2) Pressure reducing valve for the primary steering pilot supply
Locate the pressure reducing valve for the primary steering pilot supply. The pressure reducing valve is located on the control manifold in the hydraulic service center.
Before adjusting the pressure reducing valve (2), release the hydraulic system pressure. Refer to Testing and Adjusting, "System Pressure - Release".
Ensure that the work tool is on the ground. Turn the engine start switch to the OFF position. Note: Always, turn adjustment screw clockwise in order to adjust the pressure. Turning clockwise will compensate for any internal friction inside the valve that would oppose the setting of the bias spring. For example, if the adjustment screw needs a 1/2 turn counterclockwise to decrease the
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
1090, 1190, 1190T, 120G, 1290T, 12G, 130G, 140B, 14G, 1673C, 173B, 183B, 215, 215B, 215C, 215D, 216, 216B, 216B3, 219D, 225, 225D, 226B, 226B3, 228, 229, 229D, 231D, 232B, 235, 235B, 235C, 235D, 236, ...
16G, 16H NA, 24H, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3606, 3608, 3612, 3616, 3618, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 5080, 5090B, ...
120G, 12G, 130G, 140G, 143H, 14G, 14H, 14H NA, 160G, 163H NA, 16G, 16H, 16H NA, 215, 225, 225D, 227, 235, 235B, 245, 24H, 3304, 3304B, 3306, 3306B, 3406, 3408, 3408B, 3408C, 3412, 3412C, 350 L, 3508, ...
120G, 120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 1676, 1693, 16M, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3412, 3512, 44, 508,...
24H, 3406B, 3406C, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 5110B, 621F, 621H, 623E, 623F, 627F, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 740B, 772, 773B, 773D, 773E, 773F, 773G...
14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 318C, 319C, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 16, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16G...
12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 160H, 160H ES, 160H NA, 16G, 16H NA, 24H, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 375, 375 L, 5080, 578, 589, 621E, 621F,...
16G, 245, 245B, 245D, 3406, 3406B, 3408B, 3412, 375, 375 L, 5080, 621, 621B, 621E, 631E, 637D, 814B, 980C, 980F, D9L
3N8470
SEAL-MECHANICAL
3408, 3412, 3508, 3508C, 3512
3408, 3412, 3508, 3508C, 3512
3408, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C
115, 3408, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C
3408, 3412, 3412C, 3412D, 3412E, D348, D353C, G342C
8T1568
SEAL-BONDED
3406B, 3408, 3412, 3508, 3512, 385C, 550, 570, 580, CB-534, M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
3406B, 3408, 3412, 3508, 3512, 385C, 550, 570, 580, CB-534, M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
120G, 320 L, 322 FM L, 3408, 3408B, 3408C, 3412, 3508, 3512, 3516, 613C II, 631D, 633D, 637D, 769C, 772, 772B, 777B, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 824B, 824S, 955C, 992C, D10, D250E, D35C, ...
120G, 12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 245D, 3306B, 330B L, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 350, 589, 631E, ...
3406, 3406B, 3406C, 3406E, 3408, 3408B, 3412, D353C, G3406
3406, 3406B, 3406C, 3406E, 3408, 3408B, 3412, D353C, G3406
3408, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3516B
3412, 3412D, CB-544, CB-545, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M33...
3412, 3412D, 953C