1153031 SEAL-LIP Caterpillar parts
311, 311B, 312, 315, 317, OEMS
Rating:
Alternative (cross code) number:
CA1153031
115-3031
1153031
CA1153031
115-3031
1153031
Weight: 0.15 pounds 0 kg.
Information:
AXIAL WIDTH
11
mm
BORE DIAMETER
0
mm
CONSTRUCTION TYPE
DBI
MATERIAL
Nitrile Rubber (NBR) - 75 Duro
SEAL OD
62
mm
SHAFT OD
40
mm
EXCAVATOR, UNDERCARRIAGE,
Number on catalog scheme:
18
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9508 Face Seal Plug (11/16 - 16 THD) 4
6V-9829 Cap Assembly (11/16 - 16 THD) 4 Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g01151612
Disconnect harness assemblies (1) from control valve block (2) .
Illustration 2 g01151673
Disconnect hose assemblies (4) from control valve block (2) .
Disconnect tube assemblies (5) from control valve block (2) .
Remove bolts (3) and control valve block (2) from the machine.
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 6V-9508 Face Seal Plug (11/16 - 16 THD) 4
6V-9829 Cap Assembly (11/16 - 16 THD) 4 Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g01151612
Disconnect harness assemblies (1) from control valve block (2) .
Illustration 2 g01151673
Disconnect hose assemblies (4) from control valve block (2) .
Disconnect tube assemblies (5) from control valve block (2) .
Remove bolts (3) and control valve block (2) from the machine.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
215, 307, 312, 315, 317, 3176B, 3176C, 3196, 3204, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3456, 3508, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3612, 773G, 773G LRC, 7...
3054, 307, 312, 315, 317, 416B, 416C, 426B, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M...
1090, 120H, 120H ES, 120H NA, 130G, 135H NA, 16, 205B, 211B, 215, 215B, 215D, 224B, 225, 227, 229, 229D, 231D, 235, 235C, 235D, 245, 245B, 245D, 3114, 3116, 3208, 320B FM LL, 322C, 3304, 3306, 3306B, ...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 16...
10S, 115, 1390, 14H, 14M, 16H, 16M, 173B, 183B, 193, 215, 215B, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 24H, 24M, 2590, 2864C, 312B L, 312C, 312D2, 315, 31...
12M, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 312B L, 312C, 315B L, 317, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 450E, 535D, 545D, 554, 559, 613G, 908, 914G, 924G,...
307B, 308C, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B, 315B L, 315C, 315D L, 317, 317B L...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2590, 320D FM, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 5...
12F, 14E, 3176C, 3196, 330, 330 L, 345B, 345B II, 345B L, 350, 365B, 365B II, 365B L, 651E, 657E, 725, 725C, 730, 730C, 797, 797B, 797F, 933C, 939C, 994F, 994H, AD40, AD45, AD45B, AE40, AE40 II, C-10,...
3044C, 311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320...
312C, 312D, 315, 315B L, 315C, 315D L, 317, 317B LN, 318B, 320 L, 320N, 322 FM L, 322 LN, 325, 325 LN, 330, 330 FM L, 350 L, M318, M320
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN, E110, E110B, E120B, E200B
311, 311B, 312, 312B, 312B L, 312D, 313B, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR...
0997076
SEAL-O-RING
307C, 308C, 311, 311B, 312, 312B, 315, 315B, 315B FM L, 317, E110B, OEMS
307C, 308C, 311, 311B, 312, 312B, 315, 315B, 315B FM L, 317, E110B, OEMS
311, 311B, 312, 312B, 315, 315B, 315B FM L, 317, E110B, OEMS
2384C, 2484C, 301.5, 304, 304C CR, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 3...
307, 307B, 311, 311B, 312, 312B, 312B L, 312C L
307, 307B, 307C, 307D, 308C, 311, 311B, 312, 312B, 312B L, 312C L, 313B, E110B, E120B, E140, E70B, M315
1090, 1190, 1190T, 1290T, 1390, 302.5, 303, 304, 305, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 3...
305.5, 306, 307D, 308D, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LC...
2384C, 2484C, 302.7D, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307, 307B, 307C, 307D, 307E, 30...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 305.5D, 305.5E, 305C CR, 307, 307B, 307C, 308C, 308D, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, ...
0964615
SEAL
311, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 320 L, 320B, 320N, 322B L, 322B LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B L, 345B L, E110B, E120B, E200B, E240C, E300B, OEMS
311, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 320 L, 320B, 320N, 322B L, 322B LN, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B L, 345B L, E110B, E120B, E200B, E240C, E300B, OEMS
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303.5C, 303.5D, 303.5E, 303C CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 308E, 308E CR, 308E2 CR, 311, 3...