SEAL GP-CRANKSHAFT 1154210 - Caterpillar

Gilkes & Gordon Ltd. - Model 250/700
Pump rotation is clockwise as seen from the drive end.(1) Tighten nut to a torque of ... 162 N m (120 lb.ft.) If the cotter pin can not be installed, turn the nut clockwise until the nearest slot in the nut is in alignment with the hole in the shaft.(2) Thickness of shims: 3N8441 ... 0.38 mm (.015 in.)3N8455 ... 0.25 mm (.010 in.)Use as necessary to get an axial clearance of 0.18 to 0.23 mm (.007 to .009 in.) on each side of impeller (A).(3) Put 9S3265 Retaining Compound between the shaft and collar at assembly.(4) Tighten nut to a torque of ... 95 to 110 N m (70 to 80 lb.ft.)(5) Tighten bolt to a torque of ... 55 7 N m (40 5 lb.ft.)Hit the bolt with a soft hammer and tighten it again to a torque of ... 55 7 N m (40 5 lb.ft.)MP Pumps Inc. No. 25706
(1) Tighten nut to ... 60 7 N m (45 5 lb.ft.)(2) Tighten nut to ... 100 14 N m (74 10 lb.ft.)