SEAL-O-RING 1197844 - Caterpillar

Illustration 1 g03658636
Typical example
Illustration 2 g03658637
Typical solenoid connections
Table 1
Specification for 204-9742 Electric Starting Motor Gp , and 207-1516 Electric Starting Motor Gp    
Item     Qty     Part     Specification Description    
-     -     -     Current consumption at 20V and 25 °C (77 °F):
1. For Pull-in current is 57 Amp.
2. For Hold-in current is 13 Amp max.
3. Maximum rated current is 750 Amp.    
A     -     -     The clearance between the pinion and the housing is
4.6 mm (0.18 inch).    
1     1     6V-8188 Nut     A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (1) . A maximum of two of the terminals may be equal to or greater than 0 AWG.
Torque to
30.5 3.5 N m (269.9 31.0 lb in).    
2     -     6V-8188 Nut     Torque to
30.5 3.5 N m (269.9 31.0 lb in).    
3     1     6V-8378 Nut     Torque to
2.6 0.8 N m (23.0 7.1 lb in).    
4     1     6V-8378 Nut     The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals.
Torque to
2.6 0.8 N m (23.0 7.1 lb in).    
5     1     6V-8188 Nut     Torque to
9.6 1.1 N m (85.0 9.7 lb in).    
6     1     5S-7349 Bolt     Torque to
8 3 N m (71 27 lb in).    
            When the electric starting motor is viewed from the drive end, the motor rotates in the clockwise direction.
No load conditions at
25 °C (77 °F):
1. Speed is 7200 1250 RPM.
2. Current draw is 82.5 17.5 Amp.
3. Voltage is 23 VDC.