SEAL-DUST 1204664 - Caterpillar

Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-2000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-4000 hrs,
25-48 mo 100.0% 0.0% 0.0% 50.0% 0.0% 50.0%
This is a 1.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-2000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-4000 hrs,
25-48 mo 100.0% 0.0% 0.0% 50.0% 0.0% 50.0%
This is a 1.0-hour job for Group 2
PARTS DISPOSITION
removed java code "affectDisposition"commented on Chints October 12 2006 Chints w.r.t CM000343756-->
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1. Deactivate the electrical system, turn the battery disconnect switch to the OFF position.
2. Remove the cover from the control panel.
3. Remove the 2349470 Timer Relay.
4. Drill a 6 mm diameter hole, for the right hand side timer fixation. On the left hand side, keep the M5 welded nut.
Use the 1636703 Timer Relay as a guide for the drilling location.
Image1.1.1
5. Remove the 2 screws at the top of the panel, and loosen the 2 screws at the bottom of the panel.
Image1.2.1
6. Mount the 8T0289 bolt with 8T0328 washer and 5C2874 nut. Install bolt and washer behind the panel. Tighten at 12 N.m.
7. Install the 1636703 Timer Relay: use the M5 screw on the left hand side, with 8T0328 washer and 5C2874 nut on the right hand side.
Image1.3.1
Image1.3.2
8. Connect the 1636703 Timer Relay.
9. Assemble the front cover, and tighten at 12 N.m.
Image1.4.1
10. Turn the battery disconnect switch to the ?ON? position.