1218080 SEAL-O-RING Caterpillar parts
M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
Rating:
Alternative (cross code) number:
CA1218080
121-8080
1218080
CA1218080
121-8080
1218080
Weight: 0.01 pounds 0 kg.
WHEELED EXCAVATOR,
Compatible equipment models: 1218080:
Number on catalog scheme:
29
For full view, you need register
Information:
Installation Procedure For The NA 297 Turbocharger Cartridge
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Check the turbocharger's nameplate for the model. If the model or type on the turbocharger's nameplate reads NA 297 or Napier 297, use the installation procedure for the NA 297 Turbocharger Cartridge.
Note: If the nozzle was removed, use Step 1 through Step 5 in order to install the nozzle from the compressor side of the turbocharger.
Place the nozzle into the gas inlet housing.
Place the clamping ring onto the nozzle. Align the holes.
Apply Tooling (A) to the threads of the capscrews. Install the capscrews and lock washers in the clamping ring. Tighten the capscrews to a torque of 67 N m (50 lb ft).
Fit the shroud assembly to the gas outlet housing.
Install the capscrews and lock washers in the shroud assembly. Tighten the capscrews to a torque of 30 N m (22 lb ft).
Illustration 1 g01288301
Illustration 2 g01288303Note: The following paragraph relates to the front turbocharger only. If turbocharger cartridge (5) is being assembled to gas outlet housing (3) on the engine, be sure to properly position the O-ring seal. This O-ring seal is placed on the oil drain on the turbocharger support. (Later designs eliminate the O-Ring seal and these engines use a tube that is inserted into the turbocharger support.) When you replace a turbocharger cartridge, be sure that the proper cover is removed from the oil drain hole. The other drain holes must remain plugged.
Fit cartridge assembly (5) in gas outlet housing (3).
Install mounting bolts (4). Tighten the mounting bolts to a torque of 492 N m (365 lb ft).
Install the nuts and washers on the studs on gas outlet housing (3). Install the safety bolts.
Connect the alternate oil feed, if necessary.
Install the alternate oil drain line, if necessary.
Connect the turbocharger wash group, if necessary.
Connect the speed sensor connection.
Illustration 3 g01288116
Install insulation (1). End By:
Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
Check the turbocharger's nameplate for the model. If the model or type on the turbocharger's nameplate reads NA 297 or Napier 297, use the installation procedure for the NA 297 Turbocharger Cartridge.
Note: If the nozzle was removed, use Step 1 through Step 5 in order to install the nozzle from the compressor side of the turbocharger.
Place the nozzle into the gas inlet housing.
Place the clamping ring onto the nozzle. Align the holes.
Apply Tooling (A) to the threads of the capscrews. Install the capscrews and lock washers in the clamping ring. Tighten the capscrews to a torque of 67 N m (50 lb ft).
Fit the shroud assembly to the gas outlet housing.
Install the capscrews and lock washers in the shroud assembly. Tighten the capscrews to a torque of 30 N m (22 lb ft).
Illustration 1 g01288301
Illustration 2 g01288303Note: The following paragraph relates to the front turbocharger only. If turbocharger cartridge (5) is being assembled to gas outlet housing (3) on the engine, be sure to properly position the O-ring seal. This O-ring seal is placed on the oil drain on the turbocharger support. (Later designs eliminate the O-Ring seal and these engines use a tube that is inserted into the turbocharger support.) When you replace a turbocharger cartridge, be sure that the proper cover is removed from the oil drain hole. The other drain holes must remain plugged.
Fit cartridge assembly (5) in gas outlet housing (3).
Install mounting bolts (4). Tighten the mounting bolts to a torque of 492 N m (365 lb ft).
Install the nuts and washers on the studs on gas outlet housing (3). Install the safety bolts.
Connect the alternate oil feed, if necessary.
Install the alternate oil drain line, if necessary.
Connect the turbocharger wash group, if necessary.
Connect the speed sensor connection.
Illustration 3 g01288116
Install insulation (1). End By:
Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
319D L, 319D LN, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E...
315D L, 316E L, 318D L, 318D2 L, 318E L, M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320E LN, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D FM, 324D L, 324D LN, 325B L, 325C, 325D, 325D...
1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320E LN, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D FM, 324D L, 324D LN, 325B L, 325C, 325D, 325D...
206, 212, M315C, M315D, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
D10T2, M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D
554, M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D, MH3037
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345C L, 345C MH, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385...
1390, 320B, 320C, 320D, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E LN, 325B L, 325C, 325C FM, 325D, 325D FM, 325D L, 329D L, 329D LN, 33...
1390, 2590, 320B, 320C, 320D, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E LN, 325B L, 325C, 325C FM, 325D, 325D FM, 325D L, 329D L, 329D ...
1390, 320B, 320C, 320D, 322B LN, 322C, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D L, 324D LN, 324E LN, 325B L, 325C, 325C FM, 325D, 325D FM, 325D L, 329D L, 329D LN, 330C, 330C MH, 330D L, 330D MH,...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
906H, 906H2, 907H, 907H2, 908H, 908H2, CP-533E, CP-54B, CS-533E, CS-54, CS-54B, CS-64B, M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D...
515, 517, 525, 525B, 525C, 527, 535B, 535C, 545, 545C, D6N, GSH15, GSH15-60, GSH9, GSH9B, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH...
8U3899
SEAL-O-RING
205B, 206B, 211B, 212B, 224B, 924G, 924GZ, CWAC-40, M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C, MP15, P215, P360, S305, S365B, S465, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT...
205B, 206B, 211B, 212B, 224B, 924G, 924GZ, CWAC-40, M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C, MP15, P215, P360, S305, S365B, S465, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT...
CB-14, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D
621H, 623H, 627H, D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D...
8U6058
SEAL-O-RING
206B, 212B, M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
206B, 212B, M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
5W8034
SEAL
205, 206, 212, 320D FM, 938K, HH44 DE, M315, M318, M320, SAT420, SAT630
205, 206, 212, 320D FM, 938K, HH44 DE, M315, M318, M320, SAT420, SAT630
554, CP-433B, M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH, M325C MH, M325D L MH, M325D MH, M330D, MH303...
8U5943
SEAL-O-RING
206B, 212B, 928HZ, 930G, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
206B, 212B, 928HZ, 930G, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
206B, 212B, 572R, 572R II, M312, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
206B, 212B, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C
206B, 212B, 365B, 365B II, 735, 735B, 740, 740B, 776D, 777D, 777F, 777G, 834K, 836K, 844, 924K, 930K, 938K, 950 GC, 950H, 962H, 963D, 973D, 986H, 990 II, 993K, D10T, D10T2, D11T, D6T, D6T LGP, D6T XL,...