SEAL AS 1231669 - Caterpillar

Tap the hole with the 263-7181 Roughing Tap (20 mm Thread). Apply 263-7258 Fluid (TAPPING) to the tap while you are tapping.
Illustration 9 g01133161
Remove all metal shavings from the hole.
Illustration 10 g01133162
Tap the hole with the 263-7182 Finishing Tap (20 mm Thread). Apply 263-7258 Fluid (TAPPING) to the tap while you are tapping.
Remove all metal shavings from the hole.
Illustration 11 g01133163
Illustration 12 g01133164
Remove the burrs from the hole with a file.
Illustration 13 g01133166
Tap the hole again with the 263-7182 Finishing Tap (20 mm Thread) by using your hands.Note: The Finishing Tap must bottom in the hole.
Illustration 14 g01133167
Illustration 15 g01133168
Clean the hole and the insert by using 222-3119 Component Cleaner to remove all the oil and the metal shavings.
Illustration 16 g01133169
Apply a liberal amount of 263-7259 Sealant to the insert and the hole.
Illustration 17 g01133170
Install the 263-7174 Threaded Insert (M20 Thread) by using the 263-7183 Insert Installation Tool (20 mm Thread) .Note: See the instructions in 263-7145 Full Torque Thread Insert Kit (M20 Thread) for instructions on assembling the 263-7183 Insert Installation Tool (20 mm Thread) .
Illustration 18 g01133173
Torque the insert until the washer on the installation tool is flush with the deck of the block.
Illustration 19 g01133174
Remove the 263-7183 Insert Installation Tool (20 mm Thread) .
Illustration 20 g01133177
Illustration 21 g01133178
Clean the hole and the surface.