SEAL 1241587 - Caterpillar

Illustration 1 g06290333
Table 1
Item Qty Part Specification Description
1 1 381-3969 Sleeve Average outside diameter (B) of the sleeve is 185.450 0.025 mm (7.3012 0.0010 inch).
Average inside diameter (C) of the sleeve is 174.045 0.050 mm (6.8522 0.0020 inch).
Height (D) of the sleeve is 25.50 0.10 mm (1.004 0.004inch).
2 2 422-6176 O-Ring Seal Install the O-ring seals before the liner is installed in the cylinder block.
Cover O-ring seals with liquid soap or P80 rubber lubricant prior to installing liners.
3 2 253-9950 O-Ring Seal Install the O-ring seals before the liner is installed in the cylinder block.
Cover O-ring seals with liquid soap or P80 rubber lubricant prior to installing liners.
4 1 471-4230 Cylinder Liner Bore (A) is 175.025 0.025 mm (6.8907 0.0010 inch).
Flange thickness (E) of the liner is 114.70 0.10 mm (4.516 0.004 inch).
- - - Use the following procedure to install the cylinder liner :
1. Install the O-ring seals before the cylinder liner is installed in the cylinder block.
2. Apply liquid soap on the cylinder block liner bore surface.
3. Install the liner in the cylinder block immediately, before the O-ring seals expand.